Salte al contenido

HP LaserJet Pro 100 Color MFPs (M175a and M175nw) Product Specifications

  • ImprimirImprimir

Product specifications

This document contains specifications for the product, including model numbers, system requirements, and environmental specifications.
figura 1: HP Laserjet Pro 100 Color MFP 175
Image of the product.

HP Laserjet Pro 100 Color MFP 175 models

Product modelsProduct number
HP Laserjet Pro 100 Color MFP 175aCE865A
HP Laserjet Pro 100 Color MFP 175nwCE866A
The following tables contain the minimum system requirements for supported Windows and Macintosh operating systems.
Operating systemFeatureMinimum system requirements
Windows XP ProcessorPentium 233 MHz processor
RAM512 MB RAM (32-bit)
Free disk space200 MB
BrowserMicrosoft Internet Explorer 6.0
Video displaySVGA 800 x 600 monitor with 16-bit color
Connectivity USBHi-Speed USB 2.0
Connectivity for Ethernet network setup (175nw model only)Network interface card (NIC)
Connectivity for wireless network setup (175nw model only)Wireless 802.11 network (802.11n recommended)
CD driveCD or DVD drive
OtherAdobe Acrobat Reader 5.0 or later

Adobe Flash Player 10 or higher
Windows Vista or Windows 7 Processor 1 GHz 32-bit (x86) or 64-bit (x64)
RAM1 GB (32-bit) or 2 GB (64-bit)
Free disk space200 MB
BrowserMicrosoft Internet Explorer 6.0
Video displaySVGA 800 x 600 monitor with 16-bit color
Connectivity USBHi-Speed USB 2.0
Connectivity for Ethernet network setup (175nw model only)Network interface card (NIC)
Connectivity for wireless network setup (175nw model only)Wireless 802.11 network (802.11n recommended)
OtherAdobe Acrobat Reader 5.0 or later

Adobe Flash Player 10 or higher
Supported Macintosh operating systems: Mac OS X v10.5 and v10.6.
ComponentMinimum system requirement
ProcessorMac v10.5 : Power PC G4, G5, or Intel Core processor

Mac v10.6 : Intel Core processor
RAM256 MB
Free disk space300 MB
BrowserSafari
Video display800 x 600 monitor with 16-bit color
Connectivity USBHi-Speed USB 2.0
Connectivity for Ethernet network setup (175nw model only)Network interface card (NIC)
Connectivity for wireless network setup (175nw model only)Wireless 802.11 network (802.11n recommended)
CD driveCD or DVD drive
OtherAdobe Acrobat Reader 5.0 or later

Adobe Flash Player 10 or higher
The dimensions listed are for the product without the power supply attached and with the scanner lid down.
Height337 mm (13.3 in)
Width442 mm (17.4 in)
Depth323 mm (12.7 in)
Weight18.8 kg (34.8 lb)
Which cartridges you use depends on your country or region. Follow these steps to purchase cartridges or check cartridge compatibility for your printer using HP SureSupply.
  1. Click this link, HP SureSupply .
  2. Scroll to the bottom of the page and make sure that the country or region location is correct.
The following tables contain specifications for supported paper.
PaperPaper weightCapacity
Plain

Legal

Letterhead

Color

Preprinted

Prepunched

Recycled
60 to 220 g/m2 (16 to 59 lb)Up to 150 sheets of 75 g/m2 (20 lb)
Glossy

Photo
130 to 220 g/m2 (34 to 59 lb)Up to 15 mm (0.6 in) stack height
TransparenciesThickness: 0.12 to 0.13 mm (0.0047 to 0.0051 in)Up to 50 sheets
LabelsThickness: up to 0.23 mm (0.0091 in)Up to 50 sheets
Envelopes60 to 90 g/m2 (16 to 24 lb)Up to 10 envelopes
Postcards and index cards135 to 176 g/m2 (36 to 47 lb)Up to 10 cards
PaperType
EverydayBond

Light

Plain

Recycled
PresentationGlossy

Heavy

Heavy gloss

Matte
BrochureExtra heavy

Extra heavy glossy

Glossy

Matte

Tri fold
Photo and CoverGlossy card

Matte cover

Matte photo

Photo glossy
OtherColor laser transparency

Colored

Envelope

HP Tough paper

Heavy envelope

Heavy rough

Labels

Letterhead

Preprinted

Prepunched

Rough
PaperSize
Letter216 x 279 mm (8.5 x 11 in)
Legal216 x 356 mm (8.5 x 14 in)
Executive184 x 267 mm (7.25 x 10.5 in)
A4210 x 297 mm (8.3 x 11.7 in)
A5148 x 210 mm (5.83 x 8.27 in)
A6105 x 148 mm (4.13 x 5.83 in)
B5 (JIS)182 x 257 mm (6.9 x 9.8 in)
RA4215 x 305 mm (8.5 x 12 in)
4 x 6 in102 x 152 mm
5 x 8 in127 x 203 mm
8.5 x 13 in216 x 330 mm
10 x 15 cm4 x 6 in
16k184 x 260 mm (7.24 x 10.23 in)

195 x 270 mm (7.68 x 10.62 in)

197 x 273 mm (7.75 x 10.75 in)
CustomMinimum: 76 x 127 mm (3 x 5 in)

Maximum: 216 x 356 mm (8.5 x 14 in)
Post cards (plain, borderless, and tabbed)Size
10 x 15 cm3.9 x 5.9 in
4 x 6 in101.6 x 152.4 mm
Japanese postcard

Postcard (JIS)
100 x 148 mm (3.94 x 5.83 in)
Double Japan Postcard Rotated

Double Postcard (JIS)
148 x 200 mm (5.82 x 7.87 in)
CustomMinimum: 76 x 127 mm (3 x 5 in)

Maximum: 216 x 356 mm (8.5 x 14 in)
Envelope typeDimension
#10105 x 241 mm (4.13 x 9.49 in)
B5176 x 250 mm (6.7 x 9.8 in)
C5162 x 229 mm (6.93 x 9.84 in)
DL110 x 220 mm (4.33 x 8.66 in)
Monarch98 x 191 mm (3.9 x 7.5 in)
  • Print speeds vary according to the complexity of the document and model.
  • Language: PCL 6.
  • ImageRET 2400.
  • ColorSphere II.
  • Maximum printing area: up to 4 mm (.16 in) from the edge of the paper.
  • Copy speeds vary according to the complexity of the document and model.
  • Digital image processing.
  • Maximum number of copies varies by model.
  • Maximum copy enlargement ranging from 200 to 400 % (depends on model).
  • Maximum copy reduction ranging from 25 to 50 % (depends on model).
  • Image editor included.
  • Microsoft Windows: Twain-compliant and Windows Image Acquisition (WIA)-compliant
  • Mac OS: Image Capture Acquisition (ICA)-compliant
  • Resolution: Up to 1200 pixels per inch.
  • Color: 48-bit color, 8-bit grayscale (256 levels of gray).
  • Maximum scan size from glass: 216 x 297 mm (8.5 x 11.7 in).
CategorySpecification
Input voltage110 to 127 Vac or 220 to 240 Vac and 50/60 Hz
Input frequency1100 mA/50 to 60 Hz
Power consumption40 watts maximum (average printing)
The following sections contain environmental specifications.

Operating conditions

ConditionRecommendedStorage
Temperature 10° to 32.5° C (50° to 91° F)0° to 35° C (32° to 95° F)
Relative humidity10 to 80%10 to 80%

Energy Star

This product is designed to reduce power consumption and save natural resources without compromising product performance. It has been designed to reduce total energy consumption both during operation and when the device is not active. This product qualifies for ENERGY STAR®, which is a voluntary program established to encourage the development of energy-efficient office products.
figura 2: Energy Star logo
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR partner, HP has determined that this product meets ENERGY STAR guidelines for energy efficiency.
For more information, go to the Energy Star Web site (in English).

Material safety data sheets

To view Material Safety Data Sheets (MSDS), go to http://www.hp.com/go/msds (in English).

Paper use

This product’s manual duplex feature (two-sided printing) and N-up printing (multiple pages printed on one page) capability can reduce paper use and the resulting demands on natural resources.

Plastic use

This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002. Plastic parts over 25 grams (0.88 ounces) are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of product life.

Recycling program

HP offers an increasing number of product return and recycling programs in many countries and regions, and partners with some of the largest electronic recycling centers throughout the world. HP conserves resources by reselling some of its most popular products. For more information about the recycling of HP products, go to www.hp.com/hpinfo/globalcitizenship/environment/recycle/ (in English).
See product requirements from regulatory agencies in your country/region. For a complete listing of regulatory notices, see the onscreen Help.

Regulatory model identification number

For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is BOISB-1001-03. This regulatory number should not be confused with the marketing name (HP LaserJet Pro 100 Color MFPs (M175a and M175nw) or product numbers (CE865A and CE866A).

Exposure to radio frequency radiation

The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. This product and any attached external antenna, if supported, shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 in) during normal operation.

Enlaces de soporte relacionados

Foros de HP Support

Encuentre soluciones y colabore con otras personas en el Foro de usuarios de HP
    HP en YouTube