Using Bluetooth Devices (Windows 7)
This information applies to HP and Compaq computers with Windows 7.
Bluetooth wireless technology provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices, such as printers, audio devices, and computers. Some examples include:
- Sharing pictures with other Bluetooth devices nearby.
- Sending files to a Bluetooth printer.
- Transferring files to nearby Bluetooth computers.
- Listening to music on a Bluetooth headset.
Bluetooth networking comes preinstalled in some HP and Compaq computers. If it was not preinstalled, you can add it to your computer by installing Bluetooth hardware. Installing Bluetooth hardware can be as simple as inserting a Bluetooth USB dongle into an open USB port and waiting for Windows to detect and setup the new hardware.
View the following video (in English) to learn more about connecting Bluetooth devices.
Before you can use a Bluetooth device you must establish a Bluetooth connection.
Use the following steps to establish a connection:
- Windows searches for devices and displays them in the window. Click the Bluetooth device you want to add, and then click Next.If Windows cannot find your device, check the suggestions in Tips for finding a Bluetooth device .
- If the device you are adding does not require verification, Windows adds the device automatically. Skip to step 5 to continue.However, most Bluetooth devices require verification before you can add them.If the device requires verification, a window displays with a pairing code. Windows waits for you to type this code into the device you are adding.
- Immediately check for an authorization message on the device to which you are connecting.If you are adding a phone, you might need to open the phone and select Yes before a screen opens allowing you to enter the pairing code.If you are connecting to another computer, you might see a message in the notification area in the lower right prompting you to allow access. You must allow access before another window displays where you can type the pairing code.NOTE:If you get an error message that the device was not added because of an authentication error, you might not have typed the pairing code quickly enough. Click Try Again. Windows generates another pairing code for you to type into the device.
- Wait while Windows configures the device.
- After the two devices are connected and configured, Windows checks for and installs the necessary drivers. Wait for this process to finish before your device is ready to use. Then click Close.
- To make sure the device finished installing correctly, click Start , and then click Devices and Printers.
- In Devices and Printers look for the device you added.
- To use the device you added, double-click it to open the Bluetooth Operations and Settings window. Click the operation you want to use, such as sending files, and follow the directions on the screen.
- To modify the File Exchange settings or authorization options, click the arrow at the bottom of the Bluetooth Operations and Settings page to expand Configuration and Settings. Make your changes and click Apply.
Follow the steps in the following sections to use HP Network Assistant or Windows Mobility Center to verify that the Bluetooth device is enabled.
The HP Wireless Assistant allows you to verify that a Bluetooth device is installed and to check the status of the wireless devices on the computer. To enable the Bluetooth device, do the following:
- Click Start, enter wireless into the search field, and then select HP Wireless Assistant from the list.
- By default, the Status column shows that both of the wireless devices are either on (enabled) or off (disabled). Also, by default, the Action column does not display.
If you want to control one of the wireless devices individually, without affecting the other devices, click Properties, and then select the Independent controls for installed wireless devices option.
If you have removed the HP Wireless Assistant, it can be reinstalled using the Recovery Manager service.
- Click Start, enter recovery into the search field, and then select Recovery Manger from the list to open HP Recovery Manager.
- Under I need help immediately, select Software program re-installation and then click Next.
- Select HP Wireless Assistant and then click Next.
Follow the on-screen instructions to complete the installation of the HP Wireless Assistant.
The Windows Mobility Center allows you to turn Bluetooth devices on and off. To turn Bluetooth devices on or off, do the following:
- Click Start, enter mobility into the search field, and then select Windows Mobility Center from the list to open the Windows Mobility Center.Alternately, press the windows key and the letter x key at the same time.
- Use the drop-down menu items in the Integrated Wireless Devices selection to turn the devices on or off.
Complete the following steps to transfer pictures from a Bluetooth phone to your computer.
- Click Start , and then click Devices and Printers.
- In Devices and Printers, double-click your phone.The Bluetooth Phone Operations and Settings window displays.NOTE:Bluetooth devices normally show that they are disconnected unless you have clicked the Connect button to use an operation that requires a continuous connection such as using the computer for a speaker phone to answer calls on your cell phone.
- Click Browse files on your phone.
- A window displays showing the folders on the phone.Click the Images folder, or the folder where your photos are stored.
- In the Images folder, select the file you want to transfer. Then click Send to Bluetooth Exchange Folder.
- Immediately check the phone for an authorization message, and press OK or Enter, depending on your phone settings, to authorize the transfer. If you send more than one file, you might have to respond for each file that you send.NOTE:If you wait too long before responding to the authorization message on the phone, a file transfer error displays on the computer. Close the error message and try again, making sure to respond more quickly to the authorization request on the phone. If the Bluetooth message cannot be cleared from your phone, turn the phone off and then back on. Then send the file again.
- When the file transfer is complete, open the Bluetooth Exchange Folder to view your photos or move them to other folders.
Complete the following steps to send files from your computer to another computer using Bluetooth.
- Click Start , and then click Devices and Printers.
- In Devices and Printers, double-click the computer with which you want to exchange files.The Bluetooth Computer Operations and Settings window displays.NOTE:Bluetooth devices normally show that they are disconnected unless you have clicked the Connect button to use an operation that requires an ongoing connection such as listening to audio from another computer through the speakers.
- Click Send files to your computer.
- The Bluetooth FTP wizard opens.Click Browse Files, and select the files you want to transfer. Then click Open to return to the wizard.
- In the Bluetooth FTP Wizard, click Next.
- Click Send. The wizard sends the files to the Bluetooth Exchange Folder on the other computer.
- Immediately check the notification area (lower-right corner of the screen) on the computer you are sending the files to for a request to authorize the transfer, or a confirmation message. Follow any instructions to complete the transfer.If the file transfer fails, check the following items:
- If you wait too long before responding to the authorization request on the other computer, a file transfer error displays on your computer. Close the error message and try again, making sure to respond more quickly to the authorization request.
- If the file transfer fails because of incorrect permissions, click the Bluetooth icon in the notification area (in the lower-right corner), and click Join a personal area network, and select the computer you are sending from. Try to send the file again.
- When the file transfer is complete, open the Bluetooth Exchange Folder to work with your files or move them to other folders.
The computer can be connected to a Bluetooth serial device or printer.
- Install the printer software that comes with the Bluetooth printer. See the printer's User Guide for instructions.
- During the printer installation you will be prompted to select how the printer is connecting. Select the Bluetooth option. Finish the printer installation.
- Double-click the Bluetooth icon in the taskbar.
- In the menu bar, click Bluetooth, then Device Configuration.
- On the Client Applications tab, find the Bluetooth serial port and note the name of the port at the far right, such as COM4. Record the name of the COM port.
- Close the Bluetooth configuration window.
- Click Start, and then click Devices and Printers.
- Right-click the icon for the Bluetooth printer and select Properties.
- On the Ports tab, check the box next to the port name you wrote down, and then click OK. This enables access to the printer via the Bluetooth serial port. Test the printer by printing from any application or file.
Adding the Bluetooth icon to the notification area in Windows 7
To add the Bluetooth icon to the notification area in the lower right so you can quickly add a device or change Bluetooth settings, complete the following instructions:
- Open Control Panel by clicking Start , and then clicking Control Panel.
- In the Search box in Control Panel, type Bluetooth, and then click Change Bluetooth Settings.The Bluetooth Settings window opens.
- Click the Options tab.Click the box next to Show the Bluetooth icon in the notification area, and then click Apply.
- The Bluetooth icon displays in the notification area in the lower right.
- Double-click the Bluetooth icon to open the Bluetooth devices window, or right-click the icon to access common tasks for Bluetooth devices.
Tips for finding a Bluetooth device in Windows 7
If Windows cannot detect the Bluetooth device, check the following items:
- Make sure that Bluetooth is turned on and set to be discoverable on the device. When a device is set to be discoverable, it uses radio signals to broadcast its location to other Bluetooth devices and computers.
- A device such as a wireless mouse or keyboard might have a button on it that you need to push.
- A device such as a Bluetooth mobile phone might have a setting in the menu that you need to select to turn on Bluetooth so the device can be discovered.NOTE:If you do not know how to set your device to be discoverable, check the information that came with your device or go to the manufacturer’s website.
- A device such as a computer might need to have the Discovery setting turned on. To turn on Discovery in Windows 7, click Start , and then click Control Panel. In the Control Panel Search box, type Bluetooth, and then click Change Bluetooth Settings.The Bluetooth Settings window displays.In the Discovery area on the Options tab, click Allow Bluetooth devices to find this computer.
- Make sure the device is turned on, is not low on battery power, and is not in sleep mode.
- Make sure you have not already added the device to your computer. Devices that have already been added are not displayed in the list of devices you can connect to in the Add Device Wizard.To check whether you have already added the device, click Start, and then click Devices and Printers. If your device is listed in Devices and Printers, you do not need to add it again. Click it to open the Bluetooth Operations and Settings page so you can use the Bluetooth operations for that device.
- Make sure the device is within wireless range of your computer, usually within six to nine feet. If you are not sure if the device is in range, move it closer to your computer, or put the device and computer in the same room.
- Make sure there are no other devices interfering with the wireless device, such as microwave ovens, cordless phones, or other wireless devices.
- If your computer uses an external Bluetooth adapter, make sure the adapter is attached and installed, and is working correctly.
- If Bluetooth is integrated in your computer, especially a notebook computer, make sure the Bluetooth radio transmitter is turned on because many notebook computers have a button to turn the transmitter on and off. If you are not sure how to turn it on, check the information that came with your computer or go to the manufacturer's website.
Answers to frequently asked questions about Bluetooth.
Why can't I hear sound on my Bluetooth headphones?
If you cannot hear sound on your Bluetooth headphones after setting up the Bluetooth connection, make sure the headphones are set as the default playback device by following the steps below.
Can I update my Bluetooth drivers?
If your computer came with Bluetooth networking preinstalled, updating the Bluetooth drivers from HP's website can improve performance and fix many Bluetooth connection issues. See the Obtaining Software and Drivers support document for more information.
If you installed Bluetooth hardware that did not originally come with the computer, visit the hardware manufacturer’s website to check for Bluetooth driver updates.
How can I tell if my computer has Bluetooth networking installed?
Bluetooth networking comes preinstalled on some HP and Compaq computers. Follow the steps below to determine if your computer has Bluetooth networking installed.
- Double-click to expand the Network adapters list and look for Bluetooth.
- If there are Bluetooth devices listed in Device Manager, your computer has Bluetooth networking installed.If there are no Bluetooth devices listed in Device manager, your computer does not have Bluetooth networking installed. You can add it to your computer by installing Bluetooth hardware.