Jump to content

Connecting a Compaq iPAQ Pocket Personal Computer (PC) to the Compaq Microportable Projector

  • PrintPrint
This document illustrates how to connect an MP4800 or MP1200 projector to a Compaq iPAQ Pocket PC by a video graphics array (VGA) cable.
NOTE: To connect a Compaq iPAQ pocket PC to the projector, the iPAQ pocket PC must have a VGA-out PC card with a 15-pin connector installed in the PC slot.
Connecting a Compaq iPAQ pocket PC
  1. Connect one end of the VGA signal cable to the VGA connector on the side of the projector.
  2. Connect the other end of the VGA signal cable to the VGA-out PC card installed in the iPAQ pocket PC slot.
  3. Connect the projector power cord to the power cord connector on the side of the projector.
  4. Connect the other end of the power cord to an electrical outlet

HP Support forums

Find solutions and collaborate with others on the HP Support Forum
HP.comHP on FacebookHP on TwitterHP on YouTubeHP on Linked InHP on FlickrHP on Google+