Jump to content

Using the Energy Save Mode

  • PrintPrint

Introduction

You can change how much energy your product consumes by turning on or turning off the Energy Save mode. When the Energy Save mode is turned on, the processor and the firmware inside the product turn off whenever you turn off the product. When the Energy Save mode is turned off, the processor and firmware inside the product continue to run, even when you turn off the product.
If you turn on the Energy Save mode, the product might take a little longer to turn on.
NOTE:The Energy Save mode and the Sleep mode are different modes.

Using the Energy Save Mode

Follow these steps to turn the Energy Save mode on or off.
  1. On the product control panel, press the Setup button ( ).
  2. Use the Down Arrow button ( ) to scroll down until Preferences displays, and then press the OK button.
  3. Use the Down Arrow button ( ) to scroll down until Energy Save Mode displays, and then press the OK button.
  4. Use the Down Arrow button ( ) to select On or Off , and then press the OK button.

HP Support forums

Find solutions and collaborate with others on the HP Support Forum
HP.comHP on FacebookHP on TwitterHP on YouTubeHP on Linked InHP on FlickrHP on Google+