Jump to content

HP Deskjet 1000 Printer - J110a support

Loading Paper and Envelopes for the HP Deskjet 1000 (J110), 2000 (J210), 3000 (J310), and Deskjet Ink Advantage 2010 (K010a) Printer Series

  • PrintPrint

Introduction

This document provides instructions for loading plain paper, photo paper, and envelopes. For a list of the paper types that the product supports, go to the Product Specifications document (c02231304) (in English) on the HP Web site.
Follow these steps to load plain paper in the product.
  1. If the product is not already on, press the Power button () to turn it on.
  2. Lift the paper tray.
    Figure 1: Lift the paper tray
    Illustration: Lifting the input tray
  3. Lower the output tray, and then pull the tray extender out.
    Figure 2: Lower the output tray
    Illustration: Lowering the output tray
  4. Slide the paper width guide to its outermost position.
    Figure 3: Slide the paper width guide
    Illustration: Sliding the paper width guide to its outermost position
  5. Load unused, plain white, U.S. letter or A4 size paper in the tray with the short edge forward and the print side up.
    Figure 4: Load paper in the tray
    Illustration: Loading paper in the tray
  6. Slide the paper width guide to the right until it stops at the edge of the paper but does not bend the paper.
    Figure 5: Slide the paper width guide to the right
    Illustration: Sliding the paper width guide to the right
Follow these steps to load photo paper in the product.
  1. If the product is not already on, press the Power button () to turn it on.
  2. Lift the paper tray.
    Figure 6: Lift the paper tray
    Illustration: Lifting the input tray
  3. Lower the output tray, and then pull the tray extender out.
    Figure 7: Lower the output tray
    Illustration: Lowering the output tray
  4. Slide the paper width guide to its outermost position.
    Figure 8: Slide the paper width guide
    Illustration: Sliding the paper width guide to its outermost position
  5. Load photo paper in the tray with the short edge forward and the print side up. If the photo paper you want to use has perforated tabs, load the paper with the tabs on top.
    Figure 9: Load photo paper
    Illustration: Loading photo paper in the product
  6. Slide the paper width guide to the right until it stops at the edge of the paper but does not bend the paper.
You can load one or more envelopes in the tray. Do not use shiny or embossed envelopes or envelopes that have clasps or windows.
  1. If the product is not already on, press the Power button () to turn it on.
  2. Lift the paper tray.
    Figure 10: Lift the paper tray
    Illustration: Lifting the input tray
  3. Lower the output tray, and then pull the tray extender out.
    Figure 11: Lower the output tray
    Illustration: Lowering the output tray
  4. Slide the paper width guide to its outermost position.
    Figure 12: Slide the paper width guide
    Illustration: Sliding the paper width guide to its outermost position
  5. Place the envelopes in the right side of the tray with the print side up and the flap on the left.
    Figure 13: Load the envelopes
    Illustration: Loading envelopes in the product
HP Deskjet 1000 Printer - J110a

More for this product

HP Support forums

Find solutions and collaborate with others on the HP Support Forum