HP Photosmart 618 Digital Camera Troubleshooting
PrintISSUE:
This document describes the installation of the HP Photo Imaging Software and the use of the HP Photosmart 315, 315xi, 618, 618xi, 912, and 912xi digital cameras with a personal computer.
SOLUTION: 
Follow the steps below to install and run the HP Photo Imaging Software version 2.5. This procedure requires 150 MB of free disk-drive space.
NOTE: The HP Photo Imaging Software runs on Microsoft(R) Windows 98, 2000, Millennium Edition (Me), and Windows NT 4.0 (with Service Pack 5 or above). It is not supported in Windows 3.x, 95, or earlier versions of Windows NT.
- Insert the HP Photo Imaging Software CD into the computer CD-ROM drive. If the setup software does not start automatically, use Windows Explorer to locate the CD-ROM drive
- Double-click the SETUP.EXE file.
- Follow the setup-program directions to install the software.
HP Photo Imaging Software features
- Unload Camera - To download photos from the camera (HP Digital Camera Unload Software)
- View Images - To preview and perform minor editing of photos (with ACD Systems ACDSee Software)
- Print Images - To compose and print photos (with HP Photo Printing Software)
- Share Images - To share photos over the Internet
- E-mail Portal - To share photos by using e-mail (Wizard-configured)
- Help - To gain access to Help information about the HP Photosmart digital cameras and softwareNOTE: Windows NT 4.0 does not support the universal serial bus (USB) interface. To transfer images from the memory card to the computer, use a serial or parallel interface memory card reader such as the HP Photosmart P1000/P1100/P1100xi printer. Please follow the memory card reader use directions in the Camera Quick Start Guide.
- Recalls & Replacements|
- Privacy Statement|
- Terms of Use|
- © 2013 Hewlett-Packard Development Company, L.P.