Jump to content
United States - English

Copying Overview

Give us feedback

This document:
  • » Was helpful
  • » Was not helpful
  • » Does not apply

Support details

Introduction
Make copies using the front panel of the HP PSC or the HP Director software on the computer. Copy features are available using either method. However, the software offers additional copy features that are not available from the front panel.
All copy settings selected from the front panel are reset two minutes after the HP PSC completes the copy.
Loading the original
NOTE: Some copy options, such as Fit to Page, will not work correctly if the glass and lid backing are not clean.
  1. To load an original, lift the lid and place the original face down on the left front corner of the glass, with the sides of the original touching the left and bottom edges.
    Figure 1: Loading an original
  2. Close the lid.
Making copies from the HP Director
  1. Load the original.
  2. From the HP Director , click Make Copies .
  3. From the HP Copy dialog box, select the desired copy setting options.
    NOTE: To make a copy using Normal or Fast mode, you must select Plain as the Paper Type. If the Paper Type is set to Photo, the HP PSC will always copy in Best mode.
  4. Click Black or Color from the Start Copy section.
Making copies from the Front Panel
  1. Load the original.
  2. Press Start Copy Black or Start Copy Color .
    The HP PSC makes an exact copy of the original using Best quality mode.
Adjusting copy speed or quality
The HP PSC automatically copies in Best mode. This produces the highest quality copies for all paper. However, you can manually override this setting to copy in Fast mode. This produces copies more quickly and saves ink. The text is of comparable quality to copies produced in Best mode, but the graphics might be of lower quality.
  1. Load the original.
  2. Press Paper Type to select between Plain and Photo .
    NOTE: To make a copy using Fast mode, you must select Plain as the Paper Type. If the Paper Type is set to Photo, the HP PSC will always copy in Best mode.
  3. Press and hold Scan , and then press Start Copy Black or Start Copy Color .
Setting the number of copies
  1. Load the original.
  2. Press Copies repeatedly to increase the number of copies, up to a maximum of 9.
  3. Press Start Copy Black or Start Copy Color .


Other solutions customers found helpful

» HP All-in-One Product Family -- Printing Self-Test Reports
Search
Contact HP