Jump to content

HP Officejet 5610 All-in-One Printer support

Performing a Partial Reset of the All-in-One

  • PrintPrint

Introduction

There are times when a partial reset may be required to restore the all-in-one to proper operation. A partial reset does the following:
  • Reset the user settings to the factory defaults.
  • Reset the language and country/region settings on some models.
NOTE:The HP Officejet 500 or 600 series must be connected to a computer running the all-in-one software to perform a partial reset. Do not perform this process if the unit cannot be connected to a computer.

Performing a partial reset

Follow the steps below to perform a partial reset of the all-in-one:
  1. Unplug the power cord from the all-in-one.
  2. In the table below, locate the button combination for your model.
    NOTE:If your all-in-one model is not listed in the table, your model does not have a partial reset option.
  3. Press and hold the button combination for your all-in-one.
  4. While still holding the buttons down, plug the power cord back in. Release the buttons after the all-in-one starts up.
Product family/modelButton press
HP Officejet D series

HP Officejet G series (except G55 models)

HP Officejet K series

HP Officejet V series

HP Officejet 4100 series

HP Officejet 4200 series

HP Officejet 5100 series

HP Officejet 5500 series

HP Officejet 5600 series

HP Officejet 6100 series

HP Officejet 6200 series

HP Officejet 7100 series

HP Officejet 7200 series

HP Officejet 7300 series

HP Officejet 7400 series

HP PSC 900 series

HP PSC 2200 series

HP PSC 2400 series

HP PSC 2500 series

HP Fax 1240

HP Photosmart 2500 series

HP Photosmart 2600 series

HP Photosmart 2700 series
Press and hold # and 3 while plugging in the power cord.

Note: For models that are not fax capable, press Plus (+ ) instead of # .
HP PSC 1100 seriesDisconnect and then reconnect the power cord. When the lights begin to flash, press and hold On and Paper Size . When only the On light is flashing, release both buttons. When the On light is steady, the reset is complete.
HP PSC 1200 series

HP PSC 1300 series
Disconnect and then reconnect the power cord. When the lights begin to flash, press and hold On/Resume and Paper Size . When only the On/Resume light is flashing, release both buttons. When the On/Resume light is steady, the reset is complete.
HP Color Copier 180, 190, 280, and 290

HP Officejet G55 and G55xi
Press and hold Minus (- ) and 3 while plugging in the power cord.
HP Digital Copier 310

HP PSC 700 series

HP PSC 2110 series

HP PSC 2170 series
Press and hold Cancel and the Left Arrow while plugging in the power cord.
HP Officejet T series Press and hold * and 8 while plugging in the power cord.
HP Officejet 500 series

HP Officejet 600 series

HP Officejet 700 series
Press and hold 2 and 3 while plugging in the power cord.
HP Officejet (model C2890A)

HP Officejet LX

HP Officejet 300 series
Press and hold * and 4 while plugging in the power cord.
HP Digital Copier Printer 610 Press and hold Plus (+ ) and 3 while plugging in the power cord.
HP Officejet 5610 All-in-One Printer

More for this product

HP Support forums

Find solutions and collaborate with others on the HP Support Forum