HP Photosmart 325 Compact Photo Printer Troubleshooting
Installing Print Cartridges
Open the print cartridge access door, then wait until the print cartridge carriage is idle and silent.
Figure 1: Opening the print cartridge access door
Press down on the end of the cartridge to release it.
Figure 2: Releasing cartridge
If you are installing a new print cartridge, remove the protective tape.
Figure 3: Removing the protective tape
Hold the print cartridge so the nozzles are down and the contacts face toward the printer, then slide the cartridge into the carriage.
NOTE:Avoid touching the nozzles or contacts!
1 - Contacts
2 - Nozzles
Figure 4: Installing the cartridge
Press the cartridge into the carriage until it snaps into place.
Close the print cartridge access door.