Jump to content

HP LaserJet 1020 Plus Printer support

Product Specifications

  • PrintPrint

HP LaserJet 1020 Model

Figure 1: HP LaserJet 1020 printer
Illustration of the product.
Printer modelPart number
HP LaserJet 1020 printerQ5911A

System requirements

Operating systemFeatureMinimum system requirements
Microsoft Windows 2000ProcessorPentium 166 MHz processor
RAM64 MB
Free disk space150 MB
CD ROM driveRequired
ConnectivityHi-Speed 2.0 USB port
BrowserInternet Explorer 6.0
Microsoft Windows XP and XP (64-bit)ProcessorPentium 233 MHz processor
RAM128 MB
Free disk space150 MB
CD ROM driveRequired
ConnectivityHi-Speed 2.0 USB port
BrowserInternet Explorer 6.0
Microsoft Windows Vista and Vista (64-bit)Processor1 GHz or faster 32-bit (x86) or 64-bit (x64) processor
RAM1 GB (32-bit) or 2 GB (64-bit)
Free disk space920 MB
CD ROM driveRequired
ConnectivityHi-Speed 2.0 USB port
BrowserInternet Explorer 7.0
Microsoft Windows 7Processor1 GHz or faster 32-bit (x86) or 64-bit (x64) processor
RAM1 GB (32-bit) or 2 GB (64-bit)
Free disk space 920 MB
CD ROM driveRequired
ConnectivityHi-Speed 2.0 USB port
BrowserInternet Explorer 8.0

Physical dimensions

DimensionMeasurement
Height209 mm (8.2 inches)
Width370 mm (14.6 inches)
Depth242 mm (9.5 inches)
Weight (2,000-page cartridge installed)5.9 kg (13.0 lb)

Print Cartridges

ColorPrint cartridge number
BlackQ2612A
Which cartridges you use depends on your country or region. Follow these steps to purchase cartridges or check cartridge compatibility for your printer using HP SureSupply.
  1. Click this link, HP SureSupply .
  2. Scroll to the bottom of the page and make sure that the country or region location is correct.

Paper handling specifications

Review the following tables for paper handling specifications.

Paper tray capacities

TrayCapacity
Main input tray150 sheets of regular weight 75 g/m2 (20-lb paper )
Priority feed slot10 sheets of paper up to 163 g/m2 (43 lb)
Top (face down) output bin100 sheets of regular weight 75 g/m2 (20-lb paper )
Output bin60 to 105 g/m2 (16 lbsto 28lbs )

Paper types and sizes

The product supports media within the following size ranges.
  • Minimum : 76 x 127 mm (3 x 5 inches)
  • Maximum : 216 x 356 mm (8.5 x 14 inches)
Paper typeMetricEnglish
Letter216 x 279 mm8.5 x 11 inches
Legal216 x 356 mm8.5 x 14 inches
Executive184 x 267 mm7.25 x 10.5 inches
A4210 x 297 mm8.25 x 11.75 inches
COM10 envelopes105 x 241 mm4.13 x 9.5 inches
DL envelopes110 x 220 mm4.33 x 8.67 inches
C5 envelopes162 x 229 mm6.4 x 9 inches
B5 envelopes176 x 250 mm6.9 x 9.85 inches
Monarch envelopes98.5 x 191 mm3.88 x 7.55 inches
Labels216 x 279 mm8.5 x 11 inches
Custom-size mediacustom (within acceptable range)custom (within acceptable range)

Printing specifications

NOTE:Narrow and heavy paper can cause the product to print more slowly.
Print speed14 A4 pages per minute (ppm), 15 letter-size ppm

First page out in as low as 10 seconds
Print resolution600 x 600 dpi with HP Resolution Enhancement technology (REt).

1200 dpi effective output quality (600 x 600 x 2 dpi with HP Resolution Enhancement technology (REt)).
Duty cycle8,000 single-sided pages per month (maximum)

1,000 single-sided pages per month (average)

Power specifications

Review the following tables for power specifications.
WARNING:Power requirements are based on the country/region where the product is sold. Do not convert operating voltages. Doing so might damage the product and void the product warranty.

Power requirements

Model voltagePower requirementsRated current
110-volt100-127V (+/-10%)

50/60 Hz (+/-2 Hz)
3.5 amps
230-volt220-240V (+/-10%)

50/60 Hz (+/-2 Hz)
2 amps

Power consumption

PrintingReadyOff
250 Watts2 Watts 0 Watts
NOTE:Power reported is highest values measured for monochrome printing using all standard voltages.

Environmental specifications

The following information contains the environmental specifications for the product.

Operating conditions

ConditionOperatingStorage
Temperature 10°C to 32.5°C (50°F to 90.5° F)0°C to 40°C (32°F to 104°F)
Relative Humidity20% to 80% (no condensation) 10% to 80% (no condensation)

Acoustic emissions

Configuration tested: HP LaserJet P1020 printer, continuous monochrome printing on A4 paper at 14 PPM.
Sound power levelDeclared per ISO 9296
Printing (14 PPM)LWAd = 6.2 Bels (A) [62 dB (A)]
Ready (PowerSave)Inaudible
Sound pressure level bystander positionDeclared Per ISO 9296
Printing (14 PPM)LWAd = ≤4.9 Bels (A) and 49dB (A)
Ready (PowerSave)Inaudible

Material safety data sheets

Click here to get the Material safety data sheets (MSDS).

FCC compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase separation between equipment and receiver.
  • Connect equipment to an outlet on a circuit different from that to which the receiver is located.
  • Consult your dealer or an experienced radio/TV technician.
NOTE:Any changes or modifications to the printer that are not expressly approved by Hewlett-Packard could void the user's authority to operate this equipment.Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.
HP LaserJet 1020 Plus Printer

HP Support forums

Find solutions and collaborate with others on the HP Support Forum