Country-Language Options

You are on the HP Customer Care site in   Canada - English
Do you want to continue on this site?
Continue
--or--
Do you want to change your country and language?
Change
For optimal support information and options, select the country where you purchased your product.
Jump to content
HP Customer Support

HP Photosmart 7660 Photo Printer Troubleshooting

Configuring Blink Personal Edition 4.7.1 to Allow a Connection with the All-in-One

  • PrintPrint
  • Share

Introduction

This document provides steps for configuring Blink Personal Edition 4.7.1 to allow a connection with the product.

Configuring Blink Personal Edition 4.7.1 to allow a connection with the All-in-One

Follow these steps to configure Blink Personal Edition 4.7.1.
  1. Double-click the Blink Personal Edition 4.7.1 icon ( ) in the lower right corner of the computer screen (the notification area).
    The Blink Personal Edition window opens.
  2. Click Firewall .
  3. Click View all firewall rules .
  4. Click the System Wide Rules tab.
  5. In the left column, click Add a rule .
    The System Wide Firewall Rule Wizard displays.
  6. Click the Next button.
  7. Select Allow , and then click the Next button.
  8. Select IP , and then click the Next button.
  9. Select Any Direction , and then click the Next button.
  10. Select Specify local IP addresses for this rule , and then click the Add button.
    The Add IP Filter window displays.
  11. Select IP range . In the From field, enter 192.168.0.0 . In the To field, enter 192.168.255.255 .
    NOTE:Some home network routers may use a different IP address format than that used in this example. Other less common formats are “10.0.0.0 - 10.255.255.255” and “172.16.0.0 – 172.16.255.255”. See your router documentation for the format your network router uses.
  12. Click the OK button.
    The System Wide Firewall Rule Wizard window displays with the IP address range you entered.
  13. Click the Next button.
  14. Enter a name and description (such as HP Printer and Allows printer communication ), and then click the Next button.
  15. Review the next screen to make sure they match the changes you made, and then click Finish .
    The new rule displays on the Firewall Rules window.
  16. Close the Blink Personal Edition window.
    • If the product software is not installed, install it now.
    • If you installed your product software earlier, double-click the product shortcut on your Desktop to connect the printer.
    If you see firewall alerts while installing the product software or connecting your product to your network, click Allow so that the software successfully installs or connects.
    Your product is now able to be found over your network connection.

    HP Photosmart 7660 Photo Printer

  • Not your product?
    • HP Photosmart 7660 Photo Printer

    Support search

    More for this product

    HP Consumer Support Forum