Jump to content

HP LaserJet Pro M1217nfw Multifunction Printer support

Printer Views

  • PrintPrint

Front view

M1130 Series

Figure 1: Front view of product
1 - Scanner lid
2 - Scanner assembly
3 - Output bin with extension for long paper
4 - Print-cartridge door lift-tab
5 - Input tray
6 - Short media extender tool
7 - Power button
8 - Control panel

M1210 Series

Figure 2: Front view of product
1 - Document feeder
2 - Document feeder output bin
3 - Scanner lid
4 - Scanner assembly
5 - Output bin with extension for long paper
6 - Print-cartridge door lift-tab
7 - Input tray
8 - Short media extender tool
9 - Power button
10 - Control panel

Back view

M1130 Series

Figure 3: Back view of product
1 - Slot for a cable-type security lock
2 - Hi-Speed USB 2.0 port
3 - Power connection

M1210 Series

Figure 4: Back view of product
1 - Slot for a cable-type security lock
2 - RJ-45 network port
3 - Hi-Speed USB 2.0 port
4 - RJ-11 fax ports
5 - Power connection

Serial number and model number location

The serial number and product model number label is at the back of the product.
Figure 5: Serial number and model number location

Control-panel layout

M1130 Series

Figure 6: Control-panel components
1 - Display – Shows number of copies.
2 - - Up/Down Arrow buttons – Used to increase/decrease the number of copies to be made, and to adjust the light/dark and reduce/enlarge settings.
3 - - Reduce/Enlarge Indicator LED (Active when lit) - Use the arrow keys to adjust the reduce/enlarge setting for the next copy job.
4 - - Light/Dark Indicator LED (Active when lit) - Use the arrow keys to adjust the light/dark setting for the next copy job.
5 - - Number of Copies Indicator LED (Active when lit) - Use the arrow keys to adjust the number of copies for the next copy job.
6 - - Copy Settings Toggle button - Used to switch between the 3 copy settings available.
7 - - Copy button – Press to make a copy with current settings.
8 - - Cancel button – Used to cancel a print job, scan, or copy job.
9 - - Toner LED – Blinks when there is an issue with the toner (problem with cartridge, missing cartridge, etc).
10 - - Attention LED – Blinking when there is an issue.
11 - - Power LED – Solid when in a ready state, and blinking when busy.

M1210 Series

Figure 7: Control-panel components
1 - - Toner LED – Blinks when there is an issue with the toner (problem with cartridge, missing cartridge, etc.), and is usually accompanied by a message on the display.
2 - - Attention LED – Blinking when there is an issue (usually accompanied by a message on the display (paper jam, door open, etc.).
3 - - Power LED – Solid when in a ready state, and blinking when busy.
4 - 2-line Display – Used to display messages, menu navigation, printer status, time, etc.
5 - - Copy settings button – Press button to scroll through available copy settings (reduce/enlarge, # of copies, light/dark, etc.).
6 - - Setup button – Brings up the menu on the screen.
7 - - Left/Right Arrow buttons – Used to navigate through the menus and options.
8 - - OK button – Used to confirm a change in a menu.
9 - - Cancel button – Used to cancel a print, scan, or copy job, and to back out of menus to the home screen.
10 - - Copy button – Press to make a copy with current settings.
11 - - Back button – Used to back out of menus to the home screen.
12 - - Send Fax button – Press to initiate a fax.
13 - - Redial button – Used to retry a fax, or redial the last fax recipient.
14 - - Light/Dark Copy Setting shortcut – Used to go to the copy settings – light/dark screen.
15 - Number Pad – Used to enter phone numbers for faxing, or to enter the number of copies manually (when in the copy settings, # of copies screen).
HP LaserJet Pro M1217nfw Multifunction Printer

HP Support forums

Find solutions and collaborate with others on the HP Support Forum
HP.comHP on FacebookHP on TwitterHP on YouTubeHP on Linked InHP on FlickrHP on Google+