Jump to content

HP LaserJet Pro P1102w Printer support

Printing a Configuration Page

  • PrintPrint

Introduction

The configuration page lists current product settings and properties, including the IP address of your product. This page also contains a status log report and the number of pages printed so far.
Figure 1: Example of a Configuration page
Illustration of a Configuration page.

Printing a Configuration page

Use one of the following methods to print a Configuration page.

Method one: Print a Configuration page from the print driver

  1. Open the Printers folder.
    • Windows XP: Click Start, and then click Printers and Faxes.
    • Windows Vista: Click the Windows icon (), click Control Panel, and then double-click Printers.
    • Windows 7: Click the Windows icon (), click Control Panel, and then double-click Printers and Devices.
  2. Right-click the icon for your product, click Printing Preferences, and then click the Services tab.
  3. From the Print Information Pages drop-down list, click Configuration Page, and then click Print.

Method two: Print a Configuration page from the printer control panel (P1102w models only)

  1. Make sure that the Ready light () is on and that the product is idle and silent.
  2. Press and hold the Cancel button (), and release it when the Ready light () begins blinking.
    The Configuration page prints.

Method three: Print a Configuration page from the embedded Web server (P1102w models only)

  1. Open the embedded Web server.
    Type the IP address of your product in the Address field of a supported Web browser, and then click Go ().
  2. In the embedded Web server, click the Information tab, and then select Print Info Pages.
  3. Click Print next to Print Configuration Page.