Jump to content

HP S2031 20 inch Diagonal LCD Monitor support

Product Specifications

  • PrintPrint


The HP s2031 is a 50.8 cm (20 inch) monitor with liquid crystal display (LCD).
Figure 1: Photo of the HP s2031 LCD monitor

Product number

WJ676AA, WJ676AP or WJ676AS


The HP s2031 LCD monitor has the following features:
  • 1600 x 900 factory-set resolution
  • Supports DVI-D and VGA video input connectors
  • Supports High-bandwidth Digital Content Protection (HDCP) to prevent transmission of non-encrypted high definition content
  • Plug and Play capability, if supported by your computer system
  • On-screen display (OSD) adjustments for ease of setup and screen optimization

Technical specifications

LCD featureSpecification
Display size50.8 cm (20 inch) diagonal and viewable image

Panel active area (width x height): 43.94 cm x 24.91 cm (17.3 inches x 9.81 inches)
Display typeLiquid crystal display (LCD)
Input terminal1 DVI-D connector

1 VGA connector
Integrated speakersNone
Scanning frequencyHorizontal scan range 24-83 KHz

Vertical scan range 50-76 Hz
Viewing angleHorizontal viewing angle: 170 degrees

Vertical viewing angle: 160 degrees
Recommended resolution (H x V)1600 x 900 @ 60Hz (same as max and native)
Contrast ratioUp to 1000:1
Dynamic contrast ratioUp to 15,000:1 (typical)

NOTE:Dynamic Contrast Ratios up to 15,000:1 during video playback only, depending on series of frames or time duration.
Response time5 ms (typical)
Pixel pitch0.2768 mm (horizontal and veritcal)
HDCP (High-bandwidth Digital Content Protection) Support for HDCP enables the monitor to display HDTV resolution if connected through the HDMI or DVI connector. A monitor without HDCP support, or connected through analog VGA, causes the displayed video to be downgraded in quality to a DVD-like resolution that is less than HDTV.

HDCP is also a content protection system. HDCP prevents transmission of non-encrypted high definition content.
Power source - AC/DC adapterInput rating: 100 to 240V~

frequency: 50~60Hz

Power consumption:28 Watts max power consumption (21.9 Watts typical power consumption) , <1 Watt energy saving mode
Operating environmentTemperature: 5 degrees C to 35 degrees C (41 degrees F to 95 degrees F)

Humidity: 20% RH through 80% RH (non-condensing)
Storage environmentTemperature: -20 degrees C to 60 degrees C (-4 degrees F to 140 degrees F)

Humidity: 10% RH through 85%, 38.7 degrees C max wet-bulb RH (non-condensing)
DimensionsH x W x D (unpacked):

37.05 x 47.80 x 18 cm (14.59 x 18.82 x 7.09 inches)
WeightUnpacked: 4.08 Kg (8.99 lbs)
HP S2031 20 inch Diagonal LCD Monitor

HP Support forums

Find solutions and collaborate with others on the HP Support Forum
HP.comHP on FacebookHP on TwitterHP on YouTubeHP on Linked InHP on FlickrHP on Google+