Jump to content

HP Photosmart 8150 Photo Printer support

Print Jobs from Your HP Printer are Stuck in the Print Queue (Windows)

  • PrintPrint
This document is for HP Printers and computers with Windows.
The printer cannot print from a computer because a print job is stuck in the Windows print queue. This stuck print job cannot be cancelled or deleted and prevents further print jobs from printing. Clicking Cancel on the job in the queue, does nothing.
Figure 1: Example of a stuck job in queue that cannot be cancelled
 The Windows print spooler window showing a document with the status of
This issue can occur due to a variety of reasons, such as power outages, but always involves the print job spooling process in Windows.
To resolve this problem, perform the steps in this support document to reset your printing environment.

Step 1: Use HP Print and Scan Doctor

HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing problems. Download and run HP Print and Scan Doctor to quickly and automatically perform several troubleshooting tasks known to resolve this issue. When this link is clicked, HP Print and Scan Doctor is downloaded using your Internet browser's download capabilities.
  • If the printer prints, you are done.
  • If the print job becomes stuck again, continue to the next Step.

Step 2: Delete job files and restart

Whenever a print job is sent to the printer a file is created in Windows. Sometimes these files become corrupt and cause problems. To properly reset your printing environment, delete these print job files manually and restart both the computer and the printer.
  1. Turn off the printer using the power button.
  2. At your computer, press the Windows key + the R key, and enter services.msc in the Run field.
    The Service window opens.
  3. Scroll through the list of services and find the name Print Spooler.
  4. Right-click Print Spooler and select Stop.
    Figure 2: Stop selection for Print Spooler Service
     Service window the Print Spooler service selected from the Name list and the Stop selection called out.
  5. After the service has been stopped, close the service window and use Windows Explorer to browse to C:\Windows\System32\Spool\PRINTERS.
  6. Delete all files inside the PRINTERS folder.
  7. Restart your computer.
  8. Turn on your printer.
  9. Try printing again and note what happens.
    • If the printer prints, you are done.
    • If the print job becomes stuck again, continue to the next Step.

Step 3: Reinstall the print driver

If print jobs continue to get stuck when printing, reset the printing software system files by removing and reinstalling the print driver.
NOTE:If your computer is using Windows XP or earlier versions of Windows, do not use these steps. Instead, uninstall your printer software using the Add/Remove Programs list in Windows Control Panel. Install your printer software from either the printer installation disc, a full feature software download from HP's Web site (if available), or by adding the printer through Window's Add hardware feature (a built-in driver).
  1. If your printer connects to the computer with a USB cable, disconnect the USB cable from the printer.
  2. In Windows, search for and open Devices and Printers.
  3. Right-click the icon for your printer, and then click Remove Device.
    The computer uninstalls the printer software.
  4. Restart the computer.
  5. Go to HP Support - Software & Drivers to find and download printer software that matches your model of HP printer.
  6. Install the software according to the instructions on the HP Web site.
    NOTE:If you are using a USB connection, only connect the cable when instructed to do so during the software installation.
  7. Try printing again and note what happens.
    • If the printer prints, you are done.
    • If the print job becomes stuck again, continue to the next Step.

Step 4: Other things to try

If print jobs continue to get stuck, one of the following sections might help resolve the issue.
If the printer is offline, print jobs remain in queue until the printer becomes active again. Open the print queue window and make sure Pause Printing or Use Printer Offline are not selected. If a checkmark displays next to either item, select the item to clear the checkmark.
Figure 3: Print Queue printer settings
 Print Queue/Spooler  window with the Printer menu open and Pause Printing and Use Printer Offline menu items selected
Temporarily disable the firewall software on your computer to see if it is interfering with the print job. This is most commonly accomplished by right-clicking the small system tray icon associated with your security software and then selecting Disable firewall or similar. After disabling the firewall clear the print queue and try printing again. If print jobs continue to get stuck, then the firewall is not part of the problem. If your printer prints, then adjust the firewall setting to allow the Windows print spooler service access to the system.
Make sure you re-enable the firewall after you have finished testing.
Restart the computer and log into a Windows using a different Windows account. If the printer works from another account, make sure the account you are trying to print from has the necessary permissions to print.
The Window print spooler service is comprised of system files. Use System File Checker to detect any issues with system files and perform repairs.
To run System File Checker, open a command prompt and enter the following into the command line: SFC /scannow
Figure 4: Command prompt window
Command prompt window showing the progress of system file checker
HP Photosmart 8150 Photo Printer

HP Support forums

Find solutions and collaborate with others on the HP Support Forum
HP.comHP on FacebookHP on TwitterHP on YouTubeHP on Linked InHP on FlickrHP on Google+