Jump to content

HP ENVY 100 e-All-in-One Printer - D410a support

Inserting a Memory Card or a USB Flash Drive

  • PrintPrint

Introduction

Use the information and instructions in this document as a reference to insert a compatible memory card or USB flash drive into the product.
Figure 1: USB flash drive slot and memory card slot
Graphic:  USB flash drive slot and memory card slot
1 - USB flash drive slot
2 - Memory card slot
Refer to the following table for a list of memory cards and memory sticks that are compatible with your product.
Supported memory cards Supported memory sticks
MMC (4 GB)Memory Stick (128 MB)
MMCPlus (4 GB)Memory Stick Select (256 MB, 128 MB each “side”)
SecureMMC (4 GB)Memory Stick Magic Gate (128 MB)
MMCMobile (also known as Reduced-Size MMC, RS-MMC, with adapter only) (4 GB)Memory Stick Duo (with or without adapter) (128 MB)
Secure Digital (2 GB and 4 GB )Memory Stick Pro
Secure Digital High Capacity (SDHC)Memory Stick Pro Duo (with or without adapter)
Secure Digital Mini (SD Mini) (2 GB and 4 GB )Memory Sticker Pro-HG Duo (with or without adapter)
Secure Digital Micro (also known as TransFlash, with adapter only) (2 GB and 4 GB )Memory Stick Micro (with adapter only)

Inserting a memory card or a USB flash drive

Refer to one of the following options to insert a memory card or a flash drive.
  1. Remove the memory card from the camera.
  2. Press the Power button () to turn on the HP product, if it is not already on.
  3. Lift the lid on the top, right corner of the product to access the memory card slot.
    Figure 2: Location of the memory card slot
    Image:  Locate the memory card slot on the top, right corner of your product.
  4. Hold the memory card so that the label faces away from you, and the contacts face toward you. Align the card vertically to match the card slot.
    CAUTION:Inserting the memory card in any other way might damage the card and the product.
  5. Slide the memory card into the memory card slot.
    Figure 3: Slide the memory card into the memory card slot
    Illustration:  Place the memory card in the memory card slot.
  6. When the product detects the memory card, the status light flashes and then remains solid yellow.
    CAUTION:Never remove a memory card while the yellow light is flashing. Doing so can damage files on the card. Safely remove a card only when the status light next to the memory card slot is not blinking.
  1. Press the Power button () to turn on the product, if it is not already on.
  2. Lift the lid on the top, right corner of the product to access the USB flash drive slot.
    Figure 4: Location of the USB flash drive slot
    Image:  Locate the USB flash drive slot on the top, right corner of your product.
  3. Align the flash drive vertically to match the slot, and then slide the flash drive into the flash drive slot.
    CAUTION:Inserting the flash drive in any other way might damage the drive and the product.
  4. When the product detects the flash drive, the status light flashes and then remains solid yellow.
    CAUTION:Never remove the flash drive while the yellow light is flashing. Doing so can damage files. Safely remove a flash drive only when the status light next to the memory card slot is not blinking.
HP ENVY 100 e-All-in-One Printer - D410a

More for this product

HP Support forums

Find solutions and collaborate with others on the HP Support Forum