Motherboard Specifications, H-CUPERTINO2-H61-uA TX (Cupertino2)
- Manufacturer's motherboard name: Foxconn
- Motherboard name: H-CUPERTINO2-H61-uA TX
- HP/Compaq name: Cupertino2
- Socket type: LGA 1155
- TDP: 35W up to 95W (processor dependent)
- Motherboard supports the following processor upgrades:
- Core i3-2xxx/T dual core
- Core i3-2xxx dual core
- Core i5-2xxx quad core
- Core i7-2xxx quad core
- Core G5xx/T dual core
- Core G6xx/T dual core
- Dual channel memory architecture
- Two 240-pin DDR3 DIMM sockets
- Supports the following:
- PC3-8500 (DDR3-1066)
- PC3-10600 (DDR3-1333)
- Non-ECC memory only, unbuffered
- Supports 1 GB, 2 GB, and 4 GB DIMMs
- Supports up to 4 GB on 32-bit* systems
- Supports up to 8 GB on 64-bit systems

NOTE:32-bit systems cannot address a full 4.0 GB of memory
- 1x ATX power connector
- 1x ATX CPU power connector
- 1x CPU fan connector
- 1x System fan connector
- 4x SATA 2.0 connectors
- 4x USB 2.0 connectors
- 1x Internal SPDIF output connector
- 1x Front panel audio connector
- 1x ROM recovery connector
- 1x Hood sense connector
- 1x One touch reset connector
- 1x One touch recovery connector
- 1x Front panel connector
Motherboard layout
Figure 3: layout

1 - 4-pin ATX power
2 - CPU socket
3 - CPU fan
4 - 2x DDR3 DIMM sockets
5 - Battery
6 - 24-pin ATX power
7 - Hood sensor
8 - ROM recovery header
9 - One-Touch Recovery
10 - One-Touch Reset
11 - CMOS and Password jumpers
12 - 4x SATA 3 GB/s connectors
13 - Front panel header
14 - F_USB 3, 2, 1
15 - Flash override
16 - LPC Debug
17 - Minicard socket
18 - WLAN LED
19 - F_Audio
20 - PCI Express x1 slot #3
21 - PCI Express x1 slot #2
22 - System buzzer
23 - PCI Express x1 slot #1
24 - PCI Express x16 slot
25 - 3x Audio jacks
26 - S/PDIF header
27 - Chassis fan
28 - VGA port
29 - DVI-D port
30 - Ethernet port
31 - 4x USB ports

CAUTION: Do not change any jumper setting while the computer is on. Damage to the motherboard can result.
Recently browsed products
HP Support forums
Find solutions and collaborate with others on the HP Support Forum


Print













