HP TouchSmart 600-1265qd CTO Desktop PC support
Adding a Monitor Using an HP USB Graphics Adapter
This document pertains to HP All-in-One and TouchSmart PCs with Windows 7 and an HP USB Graphics Adapter for connecting a monitor and extending the Windows desktop.
You can connect a monitor to your computer as the primary display or secondary display (monitor). This document describes how to connect a monitor to a TouchSmart or All-in-One PC using the HP USB Graphics Adapter.
Because the TouchSmart or All-in-One has a built-in monitor, an extra graphics card or graphics connectors are not available. For this reason, to add a monitor you need a HP USB Graphics Adapter. This adapter provides a way to connect additional displays through the USB ports on a TouchSmart or All-in-One. This allows you to:
- Add up to six monitors (one per USB port and adapter) to one computer.
- Extend the Windows 7 desktop across multiple monitors.
- Mirror your primary screen, or view more applications at the same time.
- Add DVI or VGA monitors.
- Automatically install the DisplayLink driver and the DisplayLink Graphics Adapter software.
CAUTION:If you have an HP TouchSmart, use the HP USB Graphics Adapter to duplicate (mirror) your displays. HP TouchSmart software was not designed to operate with additional displays operating in extended desktop mode. TouchSmart software is fully compatible with graphics adapter software if used in mirror mode. To setup a TouchSmart PC in mirror mode, see Configuring multiple displays in Windows 7 below.
View a video on connecting a monitor or TV to your PC
This video contains a section on adding a monitor to a TouchSmart or All-in-One PC using a USB graphics adapter and a USB port.
The HP USB Graphics Adapter kit
Check the cable on the monitor. Depending on the cable, select a USB graphics adapter kit with the input port or connectors that match your monitor. For example , if your monitor has a DVI cable, select an HP USB Graphics Adapter. Connect the monitor cable directly into the DVI port on the graphics adapter. Connect the USB cable on the graphics adapter to one of the USB ports on your computer.
NOTE:The steps in this document apply to the use of the HP USB Graphics Adapter to add one monitor to a TouchSmart or All-in-One, and to extend or mirror the desktop. To add monitors, repeat these steps.
The HP USB Graphics Adapter kit includes:
- HP USB Graphics Adapter
- DVI-to-VGA connector
- USB cable
- CD with HP USB Graphics Adapter Software and Documentation.
The HP USB Graphics Adapter Kit includes a DVI-to-VGA adapter for monitors with a VGA connector.
Connecting a monitor using the HP USB Graphics Adapter
The graphics adapter has a USB cable on one end that connects to the computer, and a DVI port on the other end to connect to an additional display.
Connect the HP USB Graphics Adapter as follows:
- Turn off the monitor or TV. (It is not necessary to shut down the computer.)
- Connect the graphics adapter cable to one of the USB ports on the computer.
- Connect the monitor cable to the graphics adapter input port. If you have a VGA monitor, use the VGA-to-DVI adapter.
- Turn on the monitor. The driver automatically begins to install on the computer.If the installation wizard does not start automatically, go to Installing the HP Display Solutions software .
Installing the HP Display Solutions software
After the adapter is connected between the computer and the monitor, the software automatically starts to install. Accept the license agreement, and follow the on-screen instructions. Installation may take a few minutes and the screen may blink and flash during installation.
When the software installation is complete, the Screen Resolution window opens. Continue the monitor setup at Configuring multiple displays in Windows 7 .
To manually install the device driver software, follow these steps:
The HP USB Graphics Adapter kit includes a CD with the HP Display Solutions software.
Configuring multiple displays in Windows 7
When the device driver installation is complete, the Change the appearance of your displays screen is open on the computer.
You can detect, identify, and change what you see on the monitor and the computer by changing settings on this screen. If you have an All-in-One PC, you can extend your display across all installed monitors. If you have a TouchSmart PC, go to Multiple Displays: and select Duplicate these displays , and then click Apply . This mirrors your displays.
To reconfigure these displays later, click the icon in the taskbar, and select DisplayLink Manager .
NOTE:If you ever need to recover the computer operating system by using the Recovery Manager, repeat this procedure to reconfigure the displays.
For a few seconds, a large number appears on each display. The number 1 appears on the main display . The number 2 appears on the new monitor . All the settings on the opening window reference the main display (1) . For example, Display: 1. HP TouchSmart is the default configuration when a monitor and a USB graphics adapter are initially added to your computer. This is your main display .
Configuring the mouse pointer direction and switching the displays
When the installation is complete, the All-in-One PC and the new display are, by default, in extended mode, and the mouse pointer is associated with your main display. The mouse moves continuously from left to right across the extended displays, from display 1 (main display) to display 2 (new display) .
You can switch displays and the direction the mouse pointer travels.
NOTE:If you have a TouchSmart PC, go to Multiple Displays: and select Duplicate these displays , and then click Apply . Continue your TouchSmart PC display setup and configuration at Changing the display appearance below.
- Select the new monitor from the Displays list.
- Check the Make this my main display box.
- Click Apply . The screen may flicker or go blank for a few second while the settings change.The Windows 7 toolbar and desktop icons are now on the new monitor, and the computer display duplicates your desktop background. The mouse moves from left to right, from your main display (2) , to the All-in-One PC screen (1) .
By default, the mouse pointer moves from the main display to the new display.
To reverse the direction the mouse pointer travels:
Changing the display appearance
Select a display and change the resolution, orientation, text size, or get help. Go to Advanced settings , to configure the graphics device that came with your computer.
DisplayLink Manager options
When the HP USB Graphics Adapter software installs on your computer it places the DisplayLink Manager icon - in the system tray on the Windows 7 taskbar. The software includes the following options:
- DisplayLink Manager - Opens the display configuration screen. See Configuring multiple displays in Windows 7 .
- Check for updates... - Check online for DisplayLink application software updates.
- Optimize for Video - Option is on by default.
- Fit to TV... - Grow or shrink the size of your Windows desktop to match your TV screen.
- Advanced Configurations... - Configure and setup the graphics card that came with your computer.For more details on choosing the best display settings, click What display setting should I choose?
|Image resolution, position, size, or color is wrong.||Check that the USB graphics adapter supports the monitor resolution.|
Change the Windows display settings to match the resolution of the display.
This adapter supports external monitor resolutions up to 1920 x 1080 (widescreen) or 1600 x 1200 (traditional).
See Change the display appearance above.
|The display does not appear as a device in graphics software.||If you connected the monitor after the software was opened, close the software and open it again. Some software does not recognize a display added or attached while the software is open.|
|Picture quality issues.||Use a USB cable five meters (16 feet) or less in length. Longer distances can result in signal degradation and possible loss in audio and video quality. For longer distances, or for viewing 1080P or higher video definition, use a higher quality cable (Category 2) or a signal amplifier.|
|Blank or missing tiles in the TouchSmart window|
Blank or missing tiles may be displaced to the secondary monitor.
Intermittently, the touch screen calibration might be off significantly in both the TouchSmart software screens and in the Windows interface.
|HP TouchSmart software was not designed to operate with additional displays operating in extended desktop mode. The HP TouchSmart software and touch screen functionality are fully compatible with the HP USB Graphics Adapter and additional displays if the additional displays are operating in mirror mode.
If you wish to extend the desktop to a secondary monitor:
If you have already launched the software, try closing it. If this does not restore the display (eliminate the blank tiles), restart the system.
- For more information about the HP USB Graphics Adapter, refer to the HP USB Graphics Adapter - Overview (in English).
- For the HP USB Graphics Adapter product specifications and more detailed information, refer to the HP USB Graphics Adapter - Specifications (in English).
- For more information about setting up and using multiple displays in Windows 7, see Work and play better with multiple monitors (in English).
NOTE:One or more of the links above will take you outside the Hewlett-Packard Web site. HP does not control and is not responsible for information outside of the HP Web site.
More for this product
HP Support forums
Find solutions and collaborate with others on the HP Support Forum