Jump to content

HP Photosmart 5520 e-All-in-One Printer support

Loading Plain Paper, Photo Paper, and Envelopes

  • PrintPrint

Introduction

This document provides instructions for loading plain paper, photo paper, and envelopes. For a list of the paper types that the product supports, go to the Product Specifications document on the HP Web site.
Use these steps to load U.S. letter or A4 size paper in the product.
  1. Open the paper tray door, and then pull out the paper tray.
  2. Slide the paper width guides to their outermost positions.
    Figure 1: Slide the paper width guides to their outermost positions
    Image: Slide the paper width guides to their outermost positions
  3. Load a stack of plain paper into the tray with the short edge facing toward the product and the print side down. Push the stack into the tray until it stops.
    Figure 2: Load the paper into the tray
    Image: Load the paper into the tray
  4. Slide the paper width guides in until they rest against the edges of the paper, and then slide the tray back in until it stops.
    Figure 3: Slide the paper width guides against the edges of the paper, and then slide the tray in
    Image: Slide the paper width guides against the edges of the paper, and then slide the tray in
  5. Pull open and lift the paper tray extender.
    Figure 4: Pull open and lift the paper tray extender
    Image: Pull open and lift the paper tray extender
Follow these steps to load photo paper in the product.
  1. Open the paper tray door, and then pull out the paper tray.
  2. Slide the paper width guides to their outermost positions.
  3. Figure 5: Pull out the paper tray, and then slide the paper width guides to their outermost positions
    Image: Pull out the paper tray,  and then slide the paper width guides to their outermost positions
  4. Load a stack of photo paper into the tray with the short edge facing toward the product and the print side down. Push the stack into the tray until it stops.
    Figure 6: Load photo paper into the tray
    Image: Load photo paper into the tray
  5. Slide the paper width guides in until they rest against the edges of the paper.
    Figure 7: Slide the paper width guides in until they rest against the edges of the paper
    Image: Slide the paper width guides in toward the photo paper
  6. Slide the paper tray back in, and then pull open and lift the paper tray extender.
    Figure 8: Pull open and lift the paper tray extender
    Image: Pull open and lift the paper tray extender
Follow these steps to load one or more envelopes in the tray.
NOTE:Do not use shiny or embossed envelopes or envelopes that have clasps or windows.
  1. Open the paper tray door, and then pull out the paper tray.
  2. Slide the paper width guides to their outermost positions.
    Figure 9: Pull out the paper tray, and then slide the paper width guides to their outermost positions
    Image: Open the paper tray door and then slide the paper width guides to their outermost positions
  3. Load one or more envelopes into the middle of the tray, with the flaps on the left and facing up.
    Figure 10: Load the envelopes into the tray
    Image: Load the envelopes into the tray
  4. Adjust the paper width guides so that they rest against the stack of envelopes.
    Figure 11: Slide the paper width guides toward the envelopes
    Image: Slide the paper width guides toward the envelopes
  5. Slide the paper tray back in, and then pull open and lift the paper tray extender.
    Figure 12: Pull open and lift the paper tray extender
    Image: Pull open and lift the paper tray extender
HP Photosmart 5520 e-All-in-One Printer

HP Support forums

Find solutions and collaborate with others on the HP Support Forum
HP on YouTube