Jump to content
Germany - English

Motherboard Specifications, Irvine

Give us feedback

This document:
  • » Was helpful
  • » Was not helpful
  • » Does not apply

Support details

Motherboard specifications table
Part / FeatureSpecification / Support
Motherboard description
  • Name: Irvine-GL6E
CPU/Processor
  • Socket: 775
  • Supports the following processors:
    • Intel Core 2 Duo (Wolfsdale core) E8xxx (65W)
    • Core 2 Duo E6xxx (Conroe core) up to E6850 (65W)
    • Core 2 Duo E4xxx (Conroe core) up to E4400 (65W)
    • Pentium E2xxx series (Conroe core) with Dual Core technology up to E2160 (65W)
    • Celeron 4xx series (Conroe core) up to Celeron 440 (35W)
Front-side bus (FSB)
  • 800/1066/1333 MHz
Chipset
  • GeForce 7100/nForce 630i
BIOS features
  • Keyboard combination to used to enter BIOS: F10
  • System BIOS core brand: Award
Form factor
  • mini-ITX: 7.5 in X 6.8 in
Memory
  • single channel memory architecture
  • Two 240-pin DDR2 DIMM sockets
  • Supported DIMM types:
    • PC2-4200 (533 MHz)
    • PC2-5300 (667 MHz)
    • PC2-6400 (800 MHz)
  • Non-ECC memory only, unbuffered
  • Supports 2GB DDR2 DIMMs
  • Supports up to 4 GB* on 32 bit PCs (using two 2 GB DIMMs)


NOTE: *Actual available memory may be less
Expansion slots
  • One PCI Express x16 graphics (for graphics cards)
  • One PCI Express x1 (for cards such as network, sound, tv-tuner)
Video graphics
  • Integrated graphics using GeForce 7100
    • One VGA port on backplate
  • Also supports PCI Express x16 graphics cards


NOTE: Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently.
Serial ATA
  • Two SATA connectors:
    • SATA1 = Black
      SATA2 = White
    • Supports 1 SATA-150 or SATA-300 disk drive on each SATA connector
    • Speed up to 1.5Gb/sec or 3.0Gb/sec, complying with SATA 1.0 and SATA 2.0 specifications


NOTE: The faster rate of 3.0Gb/sec requires that both the hard drive and the motherboard support it. If one or the other does not support 3.0 Gb/sec, the PC negotiates down to the slower 1.5 Gb/sec.
Onboard audio
  • Audio CODEC: ALC888S
  • 6 channel high-definition audio
Onboard LAN
  • Realtek RTL-A210 10/100 Mb/s LAN PHY
Onboard USB
  • USB 2.0
  • Ten ports total
    • Four connectors on back panel
    • Three headers support six additional USB ports/devices


NOTE: Some USB ports may not be available externally for customer use. For more information, see model specifications.
Onboard 1394
  • Type: IEEE 1394a 400Mb/s
  • VIA VT6308S controller chip
  • One port total
  • One port on back panel
Back panel I/0
  • One PS/2 mouse port (green)
  • One PS/2 keyboard port (purple)
  • One coaxial SPDIF out
  • One VGA port
  • One IEEE 1394a
  • Four USB 2.0
  • One RJ-45 networking port
  • Three audio ports support 6-channel audio:
    • Line-in (light blue)
    • Microphone-in (pink)
    • Line-out (lime)
Internal connectors
  • One 2x12 mini power socket
  • Two SATA connectors
  • One 12v fan connectors for CPU fan and PC fan
  • One 9-pin header for power button, reset button, power LED, and HDD LED
  • One SPDIF digital audio output header
  • One 9-pin audio header for headphone-out and microphone-in (yellow, Vista capable, requires matching front audio jack module)
  • Three USB headers supporting 6 USB ports or devices
  • One jumper for resetting BIOS settings
  • One jumper to disable BIOS password checking
NOTE: Motherboard specifications are subject to change without notice.
Back to top
Motherboard layout and photos
Figure 1: layout
Figure 2: Photograph
Figure 3: Backplate
1 - PS/2 mouse port (green). This port is for a PS/2 mouse.
2 - Coaxial SPDIF Out port (orange). This port connects an external audio device through a coaxial SPDIF cable.
3 - Video Graphics Adapter port. This 15-pin port is for a VGA monitor or other VGA-compatible devices.
4 - IEEE 1394a port. This 6-pin IEEE 1394a port provides high-speed connectivity for audio/video devices, storage peripherals, PCs, or portable devices.
5 - LAN (RJ-45) port. This port allows connection to a Local Area Network (LAN) through a network hub.
6 - Line In port (light blue). This port connects a tape, CD, DVD player or other audio sources.
7 - Line Out port (lime). This port connects a headphone or a speaker. In 4-channel or 6-channel mode, the function of this port becomes Front Speaker Out.
8 - Microphone port (pink). This port connects a microphone.
9 - USB 2.0 ports 1, 2, 3, and 4. These four 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.
10 - PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
Back to top
Clearing the BIOS settings
CAUTION: Do not change any jumper setting while the computer is on. Damage to the motherboard can result.
This motherboard has jumpers to clear the Real Time Clock (RTC) RAM in CMOS.
Clearing CMOS
To clear CMOS, follow these steps:
  1. Temporarily set jumper CLR_CMOS to pins 1-2.
  2. Wait 5-10 seconds and then return the jumper to pins 2-3.
  3. On the next startup, enter BIOS setup to reset any custom BIOS settings.
Clearing the BIOS password settings
The BIOS password is used to protect BIOS settings from unwanted changes. If the BIOS password has been forgotten, disable password checking to enter setup and change or erase the password.
To erase the BIOS password follow these steps:
  1. Turn OFF the computer and unplug the power cord.
  2. Locate the jumper labeled CLR_PSWD1.
  3. Move the jumper on jumper CLR_PSWD1 to pins 1-2.
  4. Plug the power cord and turn ON the computer.
  5. Hold down the F10 key during the startup process and enter BIOS setup to change or clear the password.
  6. After changing or clearing the BIOS passwords, remember to reset the jumper to pins 2-3.
Back to top


Other solutions customers found helpful

» HP and Compaq Desktop PCs -- Obtaining Software and Drivers
»  -- Updating the BIOS (HP and Compaq Desktop PCs & Workstations)
» HP and Compaq Desktop PCs -- Upgrading to Windows 7
» HP and Compaq Desktop PCs -- Upgrading Memory (RAM)
Search
Contact HP