Jump to content
United States - English

Overview

Give us feedback

This document:
  • » Was helpful
  • » Was not helpful
  • » Does not apply

Support details

Product description
The HP Integrity rx2600 Server, powered by 1-2 Intel Itanium 2 processors, improves price and performance in enterprise HP-UX, Linux or Windows environments and gives customers a cost-effective yet powerful entry into a technology with tremendous growth potential.
Product features
FeaturesSpecifications
Processor(s)Intel Itanium 2 processors with floating point coprocessor:

  • 1.5 GHz with 6 MB cache
  • 1.3 GHz with 3 MB cache
  • 1.4 GHz with 1.5 MB cache
  • 1.0 GHz with 1.5 MB cache
ChipsetHP scalable processor chipset ZX1, including:
  • Processor Dependent Hardware interface
  • AGP/PCI-X host controller
  • Memory controller
System Firmware8 MB Flash EEPROM
MemoryPC2100 ECC registered DDR266 SDRAM

  • Minimum memory: 1 GB


  • Maximum memory: 24 GB
Mass storageFour shelves, supporting:

  • One front-access, slimline optical drive
  • Three 3 1/2-inch hard disk drives (1-inch height)
ControllersSCSI controller

  • 66MHz, 64bit PCI based two-channel Ultra 160 SCSI host controller


IDE controller

  • integrated Ultra ATA-100 capable controller that supports one optional slimline optical drive


Graphics controllers

  • Supported by the HP-UX operating system: ATI Radeon 7000
  • Supported by the Linux operating system: ATI FireGL4 ATI Radeon 7000, nVIDIA Quadro2 EX and nVIDIA Quadro4 900XGL
Accessory card slotsThree 64-bit 133MHz Peripheral Component Interconnect (PCI-X) slots, supporting all bridges and multifunction PCI-X devices.

All three PCI-X slots comply with PCI-X Specification.

NOTE: PCI-X slots are rated at 15 W and 3.3 V and they can support Universal cards.The system may have four PCI-X slots with no AGP slot.
Optical driveModels include either:

  • Slimline 12×/8× DVD-ROM/CD-RW combo drive
    OR
  • Slimline 8× DVD-ROM drive
System connectors
  • One ATA-100 capable IDE connector
  • Main power supply connector(s)
  • Main chassis fan connectors
  • Processor fan connectors
  • Status panel connector
  • One connector for the PCI/AGP backplane. This backplane has four PCI-X connectors for rx2600 systems.
  • Management card (optional)
  • Two internal SCSI connectors
  • One SCSI backplane connector
Management card
  • 25-pin Serial connector (with console/remote/UPS extensions - requires breakout cable)
  • 15-pin VGA connector
  • 10/100 Management LAN
Rear Connectors
  • Four USB 2.0 connectors
    HP-UX and Linux supports HP’s USB keyboard and mouse.
  • 9-pin serial (two, buffered)
    • Standard: Two UART 16550 buffered serial ports A and B (both RS-232-C)
    • Serial Port A may be used as console
  • 10/100 Management LAN and 10/100/1000 LAN
  • External LVD/SE 68-pin SCSI
ButtonsFront panel

  • Locator button and LED
  • Power button


Rear panel

  • Locator button and LED
  • Transfer of Control (TOC) button
  • Management Processor button
Non-volatile memoryBattery backed 512KB SRAM
Local area networkLAN connections
  • 10/100BT, supports Wake-On-LAN
  • 10/100/1000BT
System lockLocated on the back of the system, this lock prevents removal of the system cover
Regulatory complianceElectromagnetic

  • Complies with FCC Rules and Regulations, Part 15 as a Class A digital device.


Interference

  • Manufacturer's Declaration to EN55022 Level A, VCCI Registered, Class A, Korea RLL


Safety

  • UL Listed, CSA Certified, UL GS Mark compliant with EN 60950 and EN 41003
Software overview
Operating system
  • HP-UX
  • Linux Operating Systems
  • OpenVMS 8.2, 8.2-1 (8.3 in Sept 2006)
Management software
  • HP Ignite-UX for installation and deployment of the operating system
  • HP Software Distributor-UX for software and patch management
  • HP Servicecontrol Suite for HP-UX
  • HP TopTools for Windows and Linux
  • Management processor for comprehensive remote management of HP-UX, Windows, and Linux
  • Process Resource Manager for HP-UX workload management