Jump to content
United States - English

Motherboard Specifications, 865G7MF-SH (Spruce)

Give us feedback

This document:
  • » Was helpful
  • » Was not helpful
  • » Does not apply

Support details

Motherboard specifications table
Part / FeatureSpecification / Support
Motherboard description
  • Motherboard manufacturer's name: Foxconn 865G7MF-SH
  • HP/Compaq name: Spruce-GL6
CPU/Processor
  • Socket: 775
  • Supports the following processors:
    • Pentium D 900 series Dual Core (Pressler, 65nm)
    • Pentium D 800 series Dual Core (Smithfield, 90nm)
    • Pentium 4 601 series (Cedar Mill, 65nm)
    • Pentium 4 600 series (Prescott, 90nm)
    • Pentium 4 500 and 501 series (Prescott, 90nm)
    • Celeron D (Prescott, 90nm)
Front-side bus (FSB)
  • 800 MHz (processor dependent)
Chipset
  • Intel 865G
    • Southbridge i865G
    • Northbridge ICH5
BIOS features
  • Award brand system BIOS
  • Keyboard combination to used to enter BIOS: F1
Form factor
  • Micro ATX size form factor, 9.6 in x 8.8 in
Memory
  • Single-channel memory architecture
  • 2 x 184-pin DIMM sockets support unbuffered non-ECC 400/333 MHz DDR1 memory modules
  • Maximum HP/Compaq approved memory is 2 GB
Expansion slots
  • Three PCI
  • One AGP 8X
Video graphics
  • Integrated
Onboard audio
  • AC97 audio
  • Audio CODEC: Realtek ALC653
Onboard LAN
  • Realtek RTL8100C 10/100 Mbps Fast Ethernet controller
Back panel I/O
  • One PS/2 keyboard (purple)
  • One PS/2 mouse (green)
  • One VGA out port
  • One Parallel port
  • One Serial port
  • Four USB (2.0)
  • One RJ-45 networking port (LAN)
  • Audio ports:
    • line-in (light blue)
    • line-out (lime)
    • microphone-in (pink)
Internal connectors
  • One 24-pin ATX power connector
  • One 4-pin ATX + 12V power connector
  • One FDD connector
  • Two Parallel ATA connectors
  • Two Serial ATA connectors
  • One PC fan connector
  • One CPU fan connector
  • One 9-pin header for power button, reset button, power LED, and HDD LED
  • One 9-pin audio header for headphone-out and microphone-in
  • Two USB 2.0 headers supporting 4 USB ports or devices
NOTE: Motherboard specifications are subject to change without notice.
Motherboard photos
Figure 1: Photograph
Figure 2: Backplate
1 - PS/2 mouse port (green). This port is for a PS/2 mouse.
2 - Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices.
3 - LAN (RJ-45) port. This port allows connection to a Local Area Network (LAN) through a network hub.
4 - Line In port (light blue). This port connects a tape, CD, DVD player or other audio sources.
5 - Line Out port (lime). This port connects a headphone or a speaker. In 4-channel, 6-channel, and 8-channel mode, the function of this port becomes Front Speaker Out.
6 - Microphone port (pink). This port connects a microphone.
7 - USB 2.0 ports 1, 2, 3, and 4. These four 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.
8 - Video Graphics Adapter port. This 15-pin port is for a VGA monitor or other VGA-compatible devices.
9 - Serial Port : used for external modems, MIDI devices, other legacy peripherals.
10 - PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
Clearing CMOS
CAUTION: Do not change any jumper setting while the computer is on. Damage to the motherboard can result.
This motherboard has a jumper to clear the Real Time Clock (RTC) RAM in CMOS.
To clear CMOS, follow these steps:
  1. Temporarily set jumper CLR_CMOS to pins 1-2.
  2. Wait 5-10 seconds and then return the jumper to pins 2-3.
    When you start the system you will need to enter BIOS setup to reset any custom BIOS settings.


Print this page