Voir le contenu

Utilitaire de mise à jour du micrologiciel de l'imprimante HP LaserJet 1022nw

  • ImprimerImprimer
En téléchargeant, vous acceptez les
  • Aperçu
  • Méthode d'installation
  • Configuration système requise



Date d'édition:
Nom du fichier:
Microsoft Windows Vista
Microsoft Windows 7 (32-bit)
Microsoft Windows 7 (64-bit)
Microsoft Windows Vista (64-bit)
Microsoft Windows Server 2003
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows XP

Correctif / Amélioration

Firmware Version 20120928 Fix:
  • Added the "RFU" setting to control remote firmware updates. The options are "Enabled", "Disabled", and "Locked". The default value is "Locked" – preventing firmware updates. It must be changed to "Enabled" before another firmware update will be permitted.
Changing the RFU setting
  • Pressing the cancel button for 10 seconds causes the printer to enter the RFU enable/disable mode. The printer signals that it is in this mode by flashing the LED that indicates the current state.
  • Pressing the cancel button again will save the current state
  • While in RFU enable/disable mode, there are 4 possible states the printer can be in. Pressing the go button will cause the printer to move to the next state. LEDs signal the current state. The 4 states are:
    • If the Ready LED is flashing, RFU is enabled.
    • If the Attention LED is flashing, RFU is disabled.
    • If the Go LED is flashing, RFU is locked.
    • If none of those LEDs are lit, the printer is in cancel mode. Exiting RFU enable/disable in cancel mode will return the printer to its previously saved configuration.
The current RFU setting can be viewed at the bottom of the Config Page (under the "Print Settings" heading).
Instructions for the HP LaserJet 1022n, 1022nw Printer series Flash Firmware Update using Microsoft Windows 32 and 64 bit operating systems:

Flash Firmware Update Notes:
  • The Firmware Update Utility can use a USB or network connection to the printer.
  • When using a USB or network connection, the HP print driver software must be installed prior to using this utility.
  • The HP printer must be on and in a READY state and remain powered on during the entire firmware update process.
  • Depending on the processor speed of your pc, the firmware update process may complete on the printer before the update status progress bar in the flash firmware update utility on the pc screen completes, this is normal.
  • Once the update process has started, do not use your pc for any other activity until the process is complete.
  • Inform others connected to the product, both network and USB, to refrain from using the printer during the update period.
  • DO NOT power cycle the product or the pc until the firmware update process is complete.

  • Process:
    1. Download the flash firmware updater file from HP.com to the pc desktop.
    2. Turn the printer off and then back on to clear main printer memory.
    3. Double click on the flash firmware update utility file. An HP firmware update window will open.
    4. Select the appropriate printer in the dialog window. If you assigned a different name, choose the name that represents the correct printer.
    5. Click on "Send Firmware" when ready to proceed.
    6. The progress bar will begin to move to the right indicating information being transferred.
    7. DO NOT power cycle the product or the pc during this process or the product may become unstable and or unusable without further attention from HP. The flash firmware update can take up to 5 minutes to complete. Please be patient.
    8. During the product flash firmware update, the LED lights on the product control panel will flash. Once the download is finished the printer will return to the Ready state.
    9. At the conclusion of the firmware update, the dialog window will show a smiley face. Click on exit.
    10. The flash firmware update process is complete.

    If it is desired to verify the update, press and hold the go button (approximately 10 seconds) until the printer LED's begin to flash. Release the go button, the configuration page will print.. The configuration report will show the current firmware revision in the Product information block.

    Détails et caractéristiques techniques

    Aucune autre condition préalable

    Liens d'assistance connexes

    Forums d'assistance HP

    Trouvez des solutions et collaborez avec d'autres utilisateurs sur le Forum d'assistance HP
    Support et PilotesHP FranceHP HP sur YouTube