Salte al contenido

Controlador Intel SATA AHCI

  • ImprimirImprimir
Descargar
Al descargar, usted está de acuerdo con HP en sus
  • Visión General
  • Cómo instalar

Descripción

Exhibir detalles

Fecha de lanzamiento:
2006-03-16
Nombre del archivo:
sp32478.exe [1/1, 602.92k]
Versión
5.5.0.1035 A
Compatibilidad:
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
Microsoft Windows XP Tablet PC Edition
Microsoft Windows XP
Microsoft Windows 2000

Soluciones/Mejorías

Provides the initial release of this driver.
1. Download the SoftPaq .EXE file to a directory on your hard drive.
2. Execute the downloaded file and follow the on-screen instructions.

To use the diskette during a new operating system installation, complete the following steps:

NOTE: A diskette drive is required to use this driver. If an external diskette drive is used, ensure it is plugged into the system.

1. Insert the operating system CD and Power On the notebook to boot from the CD.
2. At the very beginning of the operating system installation, the following prompt is displayed at the bottom of the screen: "Press F6 if you need to install a SCSI or RAID driver...." When the prompt is displayed, press F6.
3. Later in the operating system installation, you are notified that a mass storage device could not be detected. When this notification occurs, press S (S=Specify Additional Device).
4. When prompted, insert the diskette that was created from the SoftPaq file, and then press Enter.
5. Select Intel 82801GBM SATA AHCI Controller (Mobile ICH7M) and press Enter.

NOTE: At this point, the following prompt MAY be displayed, depending on the version of your operating system CD. If the prompt is displayed, press Enter to use the default Windows driver and continue, if it is not displayed, simply continue with Step 6. The prompt reads as follows:
    Windows already has a driver that you can use for "Intel (R) 82801GBM SATA AHCI controller (Mobile ICH7M)". Unless the device manufacturer prefers that you use the driver on the floppy disk, you should use the driver in Windows. S=use the driver on floppy ENTER=use the default Windows driver.
6. Continue with the operating system installation, as prompted.

Detalles y especificaciones

Enlaces de soporte relacionados

Foros de HP Support

Encuentre soluciones y colabore con otras personas en el Foro de usuarios de HP