Jump to content

Compaq Wireless LAN Multiport W200 Driver for Windows 2000/XP

  • PrintPrint
By downloading you agree to HP’s
  • Overview
  • How to install
  • System requirements


Release details

File name:
sp28252.exe [1/1, 7.84M]
1.00 F
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
Microsoft Windows XP
Microsoft Windows 2000


- Increases efficiency by offloading the driver to optimize performance. When the module is in Clear or Wired Equivalent Privacy (WEP) mode, the Wi-Fi Protected Access Information Element (WPA IE) is not passed to the host.
NOTE: The computer must be restarted after installation.

1. Download the SoftPaq .EXE file to a directory on your hard drive and change to that directory. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number below.

2. Execute the downloaded file and follow the on-screen instructions to unpack the files. You will be given the chance to specify the target directory for the files, or default to the download directory. After the program finishes unpacking the files, the driver setup program automatically runs in silent mode to install the drivers.

3. After the files have been unpacked, theself-extracting .EXE file downloaded in Step 1 can be deleted, if desired.

NOTE: To run the driver setup program interactively, run the Setup.exe program in the directory where the driver files were unpacked.

Details and specifications

The Wireless LAN W200 MultiPort module must be installed and Powered On before downloading and installing this SoftPaq.

NOTE: To Power On the Wireless LAN W200 module, press FN+F2. To verify that the module is Powered On, check the LED on the side of the module. The LED is illuminated when the module is Powered On.

HP Support forums

Find solutions and collaborate with others on the HP Support Forum
HP.comHP on FacebookHP on TwitterHP on YouTubeHP on Linked InHP on FlickrHP on Google+