Jump to content

Lite-On DVDRW SOHW-1633S Drive Firmware Update

  • PrintPrint
Download
HP Download and Install Assistant
HP Download and Install Assistant makes it easy to download and install software*





Privacy Policy© 2014 Hewlett-Packard Development Company, L.P.
HP Download and Install Assistant
Follow the instructions below to install and run HP Download and Install Assistant using the HP Support Solutions Framework.
HP browser detection did not automatically detect your browser. Select the appropriate option required by your browser for each step listed below.

Instructions
Step 1:  Click on the security prompt which appears at the top of the browser window then click 'Download File…'
Step 2:  If a File Download Security Warning appears, click 'Run' to install the framework.
Step 3:  Click 'OK' to close this window and begin downloading your software.
Step 1:  Click 'Run' on the prompt at the bottom of the browser.
Step 2:  If User Account Control appears, click 'Yes' to install the framework.
Step 3:  Click 'OK' to close this window and begin downloading your software.
Step 1:  Click 'HPSupportSolutions…msi' in the lower-left corner of the browser window
Step 2:  If User Account Control appears, click 'Yes' to install the framework.
Step 3:  Click 'OK' to close this window and begin downloading your software.
Step 1:  Click 'Save File' when prompted
Step 2:  Click the downward-facing arrow in the upper-right corner of the browser, then double-click 'HPSupportSolutionsFramework…'
Step 3:  If User Account Control appears, click 'Yes' to install the framework.
Step 4:  Click 'OK' to close this window and begin downloading your software.
Step 1:  Double-click 'HPSupportSolutionsFramework…' in the upper-right corner of the browser.
Step 2:  If User Account Control appears, click 'Yes' to install the framework.
Step 3:  Click 'OK' to close this window and begin downloading your software.
Step 1:  Click 'Save File' when prompted  OR  Click on the security prompt which appears at the top of the browser window then click 'Download File…'  OR  Click 'Run' on the prompt at the bottom of the browser.  OR  Click 'HPSupportSolutions…msi' in the lower-left corner of the browser window
Step 2:  Click the downward-facing arrow in the upper-right corner of the browser, then double-click 'HPSupportSolutionsFramework…'  OR  If a File Download Security Warning appears, click 'Run' to install the framework.
Step 3:  If User Account Control appears, click 'Yes' to install the framework.
Step 4:  Click 'OK' to close this window and begin downloading your software.


Privacy Policy© 2014 Hewlett-Packard Development Company, L.P.
By downloading you agree to HP’s
  • Overview
  • How to install
  • System requirements

Description

Lite-On DVDRW SOHW-1633S drive firmware update improves compatibility with Apple's iTunes software, and Ricoh's 4X DVD+RW discs.

Purpose: Recommended

Operating System:
Microsoft Windows XP Home
Microsoft Windows XP Media Center Edition
Microsoft Windows XP Professional

Release details

Released:
2005-08-29
File name:
sp26570.exe [1/1, 2.82M]
Version
BPSD
Compatibility:
Microsoft Windows XP

Fix/Enhancement

Improves compatibility with Apple's iTunes software.
Improves compatibility with Ricoh's 4X DVD+RW discs.
WARNING: While installing this update, do not turn off, suspend, or hibernate the PC. Close all applications before starting the update.

This update program requires either a blank floppy diskette or a blank CD-R disc.

1. Download the update program.
2. Close all applications and remove any discs from the PC optical drives (CD or DVD).
3. Double-click the icon for the update file downloaded in step 1, and then click NEXT.
4. Select "I accept the terms in the license agreement", and then click NEXT to proceed with the installation.
5. Go to the next step for the type of media you are using, either a blank floppy diskette or a blank CD-R disc.

To continue the update using a blank floppy diskette:
6. Select Floppy Diskette in the "Lite-On DVDRW SOHW-1633S ...." window, and then click OK.
7. Insert the blank floppy diskette and click OK in the "Lite-On DVDRW SOHW-1633S ...." window.
8. Wait a few minutes for the program to make the Firmware Update diskette.
9. Leave the floppy diskette in the floppy drive and click OK to restart the PC.
10. Follow the onscreen instructions.
Note: Be sure to read the instructions carefully. Failure to follow the instructions will damage the drive.
11. After the update is complete, remove the floppy diskette from the floppy drive and restart the PC.

To continue the update using a blank CD-R disc:
6. Select CD Disc in the "Lite-On DVDRW SOHW-1633S ...." window, and then click OK.
7. Click OK in the "Lite-On DVDRW SOHW-1633S ...." window.
8. To continue with the remaining update steps, go below to the appropriate instructions for the CD recording software you are going to use.

For Veritas RecordNow! Version 5.0 or earlier:
1. Click START on the taskbar, and choose All Programs, CD (DVD) Recorder, RecordNow!, and then click RecordNow! again.
2. In the RecordNow! application window, click Make a Data Disc.
3. Insert the blank CD disc into the drive, and then click NEXT.
4. Click Add Files and Folders.
5. Navigate to the folder containing the update file (C:\SoftPaq\sp26570), select the sp26570.iso file and click ADD.
6. Click Yes and wait for RecordNow! to complete the update CD.
7. Leave the disc in the drive and restart the PC.
8. Follow the onscreen instructions to update the firmware.
Note: Be sure to read the instructions carefully. Failure to follow the instructions will damage the drive.
9. After the firmware update is complete, remove the CD from the optical drive and restart the PC.

For Sonic RecordNow! 6.0:
RecordNow! 6.0 does not support the ISO image burning feature. To update RecordNow! 6.0 to RecordNow! 6.7:
1. Click START on the taskbar, and choose All Programs, CD (DVD) Recorder, RecordNow!, and then click RecordNow! again.
2. Click on the Help menu icon (a question mark), then click Check for Updates.
3. Follow the onscreen instructions to complete the update.
Note: You may need to run the update twice, once to update the RecordNow! PX recording engine and again to update RecordNow! to version 6.7.
4. When you are finished updating to RecordNow! 6.7, go to the instructions for Sonic RecordNow! 6.5 or greater to continue with the remaining steps of this firmware update.

For Sonic RecordNow! Version 6.5 or 6.7:
1. Click START on the taskbar, and choose All Programs, CD (DVD) Recorder, RecordNow!, and then click RecordNow! again.
2. In the RecordNow! application window, click the tab to view Backup Projects.
3. Click Burn Image.
4. Click Browse.
5. Navigate to the folder containing the update file (C:\SoftPaq\sp26570), select the sp26570.iso file and click ADD.
6. Insert the blank CD disc into the drive.
7. Click Burn and wait for RecordNow! to complete the update CD disc.
8. Leave the disc in the drive and restart the PC.
9. Follow the onscreen instructions to update the firmware.
Note: Be sure to read the instructions carefully. Failure to follow the instructions will damage the drive.
10. After the firmware update is complete, remove the CD from the optical drive and restart the PC.

For Sonic RecordNow! Version 7.0 or greater:
1. Click START on the taskbar, and choose All Programs, Sonic RecordNow!, and then click RecordNow!.
2. In the RecordNow! application window, click the tab to view Backup Projects.
3. Click Burn Image.
4. Click Browse.
5. Navigate to the folder containing the update file (C:\SoftPaq\sp26570), select the sp26570.iso file and click ADD.
6. Insert the blank CD disc into the drive.
7. Click Burn and wait for RecordNow! to complete the update CD disc.
8. Leave the disc in the drive and restart the PC.
9. Follow the onscreen instructions to update the firmware.
Note: Be sure to read the instructions carefully. Failure to follow the instructions will damage the drive.
10. After the firmware update is complete, remove the CD from the optical drive and restart the PC.

For Sonic Digital Media Plus or Deluxe Version 7.0 or greater:
1. Click START on the taskbar, and choose All Programs, Sonic, Digital Media Projects, and then click RecordNow! Copy.
2. In the RecordNow! application window, click the Copy tab (it may already be selected).
3. Click Burn Image.
4. Click Browse.
5. Navigate to the folder containing the update file (C:\SoftPaq\sp26570), select the sp26570.iso file and click ADD.
6. Insert the blank CD disc into the drive.
7. Click Burn and wait for RecordNow! to complete the update CD disc.
8. Leave the disc in the drive and restart the PC.
9. Follow the onscreen instructions to update the firmware.
Note: Be sure to read the instructions carefully. Failure to follow the instructions will damage the drive.
10. After the firmware update is complete, remove the CD from the optical drive and restart the PC.

For Roxio Easy CD and DVD Creator 6:
1. Click START on the taskbar, and choose All Programs, Roxio Easy CD and DVD Creator 6, and then click Creator Classic.
2. In the File Menu, click Record Disc from Image.
3. Navigate to the folder containing the update file(C:\SoftPaq\sp26570), select the sp26570.iso file and click OPEN.
4. Insert the blank CD disc into the drive.
5. Click OK in the Record Setup window and wait for Roxio to complete the update CD.
6. Leave the disc in the drive and restart the PC.
7. Follow the onscreen instructions to update the firmware.
Note: Be sure to read the instructions carefully. Failure to follow the instructions will damage the drive.
8. After the firmware update is complete, remove the CD from the optical drive and restart the PC.

Details and specifications

You must be logged on as an administrator to install this update.
Lite-On DVDRW SOHW-1633S drive.
Blank floppy diskette or blank CD-R disc.