| Beschreibung: |  |
HP Officejet T, 700, 600, 500 series Installation Instructions
HP Officejet T,
700, 600, 500 series installation
This document contains
information about the HP Officejet T, 700, 600, 500 series and the Microsoft
Windows XP Home Edition and Professional operating system.
IMPORTANT:
Start with Step A, and complete the steps in order.
Step
A: UNINSTALL prior Officejet software and POWER OFF your Officejet.
- Click Start,
click All Programs, point to HP Officejet, and then click
Uninstall Software.
- POWER OFF your
Officejet and leave it powered off until the installation program prompts
you to power it on.
- Restart your computer.
Step
B: Confirm that ECP (Extended Capabilities Port) Mode is enabled.
Your computer's parallel
port must be set to ECP mode, which allows greater communications capabilities
through the parallel port. Perform the following steps to confirm that ECP mode
is enabled:
- Click Start
and then click My Computer.
- Under Tasks, click
View System Information to display the System Properties page.
- Click the Hardware
tab, and then click Device Manager.
-
Double-click
on Ports (COM & LPT). If you see "ECP Printer Port (LPT1)" listed
under Ports, ECP mode is enabled and you can proceed to Step C.
Otherwise, restart your PC and press the indicated key (F1, F2, or DEL)
to enter your computer's BIOS or "Setup" program (refer to your
PC's documentation or vendor's web site for more information). Once
you have entered Setup, locate the configuration section for your Parallel
Port and modify it to read ECP. If ECP is not a choice, use a variation
of ECP, such as ECP & EPP, or ECP DMA1. Save your changes and restart
your PC.
Step
C: Install the Officejet Software for Windows XP
During installation,
Windows will display screens recommending that you stop installation because
the Officejet software has not passed Windows Logo testing. Hewlett-Packard
has tested this Officejet product with Windows XP and verified compatibility.
When screens like the one shown below appear, click Continue Anyway.
Perform the following
steps to install the Officejet software for Windows XP:
- Log on using a
local Administrator account; do not attempt to install the HP Officejet as
a Remote Administrator, Power User, or Guest.
- Make sure that
no applications (including Norton System Doctor or virus checkers) are running.
Open Windows Task Manager by right-clicking an empty space on the taskbar,
and then click Task Manager. Click the Applications tab, select
any applications that are running, and click End Task. When the list
of tasks is empty, close Windows Task Manager.
- Double-click on
the installation file for your HP Officejet product and language (e.g., oj700_ENU_xp1407.exe)
and click
Finish to accept the default Installation Folder. If you are reinstalling
the Officejet software, you may get an Overwrite Protection warning. If so,
click "Yes to All" to proceed with the installation.
- When the HP Officejet
Essentials screen appears, click Install and follow the prompts that
appear on the screen.
- When prompted
to do so, power on the HP Officejet and make sure it is connected to your
computer.
- In a few moments,
several Found New Hardware Wizard screens will appear. Accept the recommended
action on each screen by clicking Next or Finish to continue.
If the Found New Hardware Wizard screens do not
appear, restart your computer.
- When the HP Officejet
Fax Setup Wizard appears, provide the requested information.
- Click Print
Test Page to verify that your installation was successful.
- Click View
the ReadMe File for important information about what is supported.
return
to contents
Microsoft
Windows XP system requirements
- PC with 300 megahertz
(MHz) or higher processor recommended (233 MHz minimum required); Intel Pentium/Celeron
family, AMD K6/Athlon/Duron family, or compatible processor recommended
- 128 megabytes
(MB) of RAM or higher recommended (64 MB minimum supported)
- 300 MB of available
hard disk space, plus 50 MB for full color scanning
- Super VGA (800
× 600) or higher resolution video adapter and monitor
- CD-ROM drive
- available parallel
port with Extended Capabilities (ECP)
- IEEE-1284 compliant
parallel cable
- sound card and
Internet access recommended
- Windows XP 64-bit
and Server Editions are not supported
- Networking is
not supported
- Printing from
DOS, printing from DOS programs, or printing from a DOS box within Windows
is not supported
- Local Administrator
and User account types are supported
- Power User and
Remote Administrator account types are not supported
- Local Guest user
account types are supported with limited functionality; for example, Guests
cannot scan to email or edit phone book entries
- Product Tour,
Optical Character Recognition (OCR) software, and other non-HP software is
not included
- Fast User Switching
is not supported
- see http://www.hp.com/go/windowsxp
for more information
return
to contents
If you have access
to the Internet, you can obtain additional information and support by clicking
on the link below that corresponds with your HP Officejet product and language.
Information varies by product and country, but typically includes frequently
asked questions, solutions to common problems, setup and install information,
how to use and maintain your HP Officejet product, software and driver updates,
manuals, and information on calling or e-mailing HP for support.
For a list of current
HP customer support telephone numbers, visit http://www.hp.com
and choose your country or region.
Windows® and MS
Windows® are U.S. registered trademarks of Microsoft Corp.
Copyright © Hewlett-Packard Co. 2001. This information is subject to change
without notice and is provided "as is" with no warranty. Hewlett-Packard
shall not be liable for any direct, indirect, special, incidental or consequential
damages in connection with the use of this material.
|
